Specifications

Output voltage: 0.5 mV
Static Compliance: 17-19 mm/N (measured between 18 and 30 °C
Tracking Force Range: 1.6 – 2.0 grams (1.8 grams recommended)
Channel Balance: 0.5 dB at 1 kHz
Channel Separation: 28 dB
Frequency Response: 15 Hz – 32 kHz ± 2 dB
Internal Resistance: 8 Ohms
Cartridge Weight: 11.5 grams
Cantilever Material: Tempered aluminium coated with C37 lacquer
Coil Material: Silver
Stylus Profile: Shibata EVO

The least compromised commercially available tonearm on the market.

Reflex-type clamp with internal liquid damping reduces resonances at the vinyl-platter and vinyl-spindle interfaces.

A good electrical match with my chosen LOMC phono cartridges.

The Acoustical Systems UNI-P2S is the most precise tool available for setting or checking the pivot-to-spindle distance for any combination of turntable and tonearm.

The Acoustical Systems UNI-Protractor is the most precise and versatile tool available for achieving one's desired tangential curve for any combination of turntable, pivoted tonearm, and cartridge.

Three pairs of heavy gauge copper speaker cables from Basis Audio connect each of the SGR Audio EL-series stereo amplifiers directly to their respective driver's voice coils within the MT3F loudspeaker system.

This double gimballed tonearm (based loosely on the classic Breuer design) features an effective length of 12

Two arm version of this high mass, non-suspended, German-made turntable. Uses the latest Sinus motor fed by the optional vacuum tube power supply. Improved dramatically with Special Decoupled Platter (SDP) upgrade and custom arm height spacers from Acoustical Systems. Stock rubber belt drive replaced with thread drive concept.

Heavy duty version of this four shelf elegant, German-made equipment rack. Shelves and shelf frames are of natural finished Canadian maple while the vertical uprights are anodised aluminium. Supported on four Cerabase height adjustable feet.

This elegant, German-made three shelf equipment rack houses the electronics for the SGR Audio MT3F active loudspeaker system (MTX line level crossover and trio of EL-series stereo power amplifiers).

These affordable and well made power cables (with Australian C-Tick approval) are employed on the electronics for the SGR Audio MT3F active loudspeaker system.

6 Australian-style filtered AC outlets with local C-Tick approval meets my needs for supplying power to all front end electronics.

Solid state phono preamplifier with internal Jensen step-up transformers.

For Jeff Rowland Design Group Cadence phono preamplifier.

From THE original innovator of the point nozzle-type record cleaning machine. The choice of cleaning fluid and the soak time is one factor in obtaining the cleanest possible vinyl record grooves, the complete removal of that fluid along with all of the solubolised organic matter and dissolved inorganic contaminants is quite another.

In stock form this linestage preamplifier is already a force to be reckoned with in the world of commercially available high end audio electronics. With selected parts substitutions (attenuators, caps, vacuum tubes, connectors, power supply diodes), it performs at an even higher level of musical communication with a spatial presentation which must be heard to be believed.

In stock form this phono preamplifier is already a force to be reckoned with in the world of commercially available high end audio electronics. With selected parts substitutions (caps, vacuum tubes, connectors, custom SUT), it performs at an even higher level of musical communication with a spatial presentation which must be heard to be believed.

An intelligently designed, hum-free cartridge for the playback of monophonic vinyl records.

The WS-4 from Minus K includes their top performing BM-1 isolation platform, with its natural frequency of 0.5 Hz in both horizontal and vertical axes, and a matching welded steel stand. I have made a few minor modifications to better suit the intended application.

The MTX active crossover from SGR Audio (on the top shelf in the accompanying photo) divides the full range musical signal (at line level, i.e. before the power amplification stage) into suitable frequency ranges for each of the drivers within the MT3F loudspeaker system. Crossover slopes are 4th order (24 dB/octave) and centred at 200 and 3,500 Hz.

The EL-15S solid state power amplifier (on the middle shelf in the accompanying photo) only sees frequencies above 3,500 Hz and powers the tweeters within the SGR Audio MT3F loudspeaker system.

The EL-15S solid state power amplifier (uppermost component on the bottom shelf in the accompanying photo) only sees frequencies betwen 200 and 3,500 Hz and powers the midrange drivers within the SGR Audio MT3F loudspeaker system.

The EL-30S solid state power amplifier (lowermost component on the bottom shelf in the accompanying photo) only sees frequencies below 200 Hz and powers the bass drivers within the SGR Audio MT3F loudspeaker system.

These 3-way sealed loudspeakers are an integral part of an active system (including active line level crossover and six channels of amplification, each dedicated to one of three frequency ranges). The 10

From Thoroughbred Audio Visual Engineering in Australia, these power cables are well made to suit my specific needs while being very affordable. Perfect for this power cable agnositic. These connect all front end electronics to the IsoTek EVO3 SOLUS power distributor/filter.

All line level interconnects are custom made using van den Hul D-102 MkIII Hybrid cable terminated with Furutech locking RCA or XLR plugs. The cable shield is soldered to flying leads with aligator clips for RCA-terminated cables which enables one to keep the respective pieces of connected equipment at the same ground potential for zero hum and noise. I have tidied things up by using cuastom made brass earthing bars behind each of the Lamm LP2 phono preamp and Lamm LL2 linestage preamps.

Specifications[lessthansign]br[greaterthansign][lessthansign]br[greaterthansign]Output voltage: 0.5 mV[lessthansign]br[greaterthansign]Static Compliance: 17-19 mm/N (measured between 18 and 30 °C[lessthansign]br[greaterthansign]Tracking Force Range: 1.6 – 2.0 grams (1.8 grams recommended)[lessthansign]br[greaterthansign]Channel Balance: 0.5 dB at 1 kHz[lessthansign]br[greaterthansign]Channel Separation: 28 dB[lessthansign]br[greaterthansign]Frequency Response: 15 Hz – 32 kHz ± 2 dB[lessthansign]br[greaterthansign]Internal Resistance: 8 Ohms[lessthansign]br[greaterthansign]Cartridge Weight: 11.5 grams[lessthansign]br[greaterthansign]Cantilever Material: Tempered aluminium coated with C37 lacquer[lessthansign]br[greaterthansign]Coil Material: Silver[lessthansign]br[greaterthansign]Stylus Profile: Shibata EVO