These speakers use a double tweeter array to produce the midrange. The Be tweeter between the arrays is used as the actual tweeter. Then two big ass woofers are added. Extremely well reviewed and high value speakers!
Mr K Passive Preamplifier PPA01
This is an extremely high quality autoformer based passive preamp. There is absolutely no noise but with with excellent soundstaging and dynamics.
Aria Audio Aria Signature MK2
This is a beautiful hand-built amplifier that puts out100 watts of Class A power with very high current capability. A extremely seductive yet authoritative sound with the Moabs.
MHDT Orchid
The Orchid DACs are legendary. They use the TDA 1541A R2R chip for a a realistic and natural sound. This Orchid was Bill Dion's (grannyring) personal DAC which he highly modified by doing the following:
- Upgraded the output capacitors to a custom made set of 2.2uf copper foil in beeswax, flat stacked design caps from Jupiter Condenser. Chris of Jupiter does not offer these out as they cost too much to build and takes too much time to manufacture. They are a sonic cut above the fantastic round Jupiter copper foil caps. - 4 Miflex KPCU-02 0.1 micro farad copper foil caps in other key positions. - 10 carefully selected resistor types located though-out the DAC
Innuos PULSE
Network Streamer internal with a RECAP2 power supply by Dr. Sean Jacobs built-in. Uses the innuOS 2.0 and Sense software. It's the best sounding streamer, OS and control software I've ever used. Here is more info:
⦿ Medical-grade filtered IEC
⦿ Audio-grade toroidal transformer with an epoxy-filled center for dampening vibration, magnetic screening with coated SYN-SHIELD copper tape between windings and wrapped in black Mylar Tape
⦿ Over 40000 µF of high-end Mundorf Capacitors
⦿ Coilcraft Inductor
Inakustik Referenz LS-2404 Air Interconnects and Speaker Cables
Inakustik Referenz LS-2404 Air Interconnects and Speaker Cables. These are meticulously made open-weave copper cables. Each strand is separated to insure an air insulation between the strands. It makes for an open very natural sound with the best bass I've had in my listening room. Expensive but worth it.
Network Acoustics Muon System
This is a complete digital cable system (filter, LAN cable, USB cable). This at a higher level than the famed EVO system.
Cayin Audio Mini-CD MK2
This is an excellent little CD player. I mostly stream but I still have hundreds of CDs.
DIY Power cables
DIY power cables. They use multi-strand copper, an open weave, cotton cord in the center and ERS cloth at both ends. It's the formula Danny Richie uses for his power cables. They have an open, airy yet very solid sound. The key is to break them in for hundreds of hours.
Synergistic Research Powercell 12 UEF
This is a classic power conditioner. It's UEF/EM based and compliments every component plugged in to it!
Synergistic Research Galileo SX Grounding Block
The Galileo SX Grounding Block makes the system absolutely silent at idle and creates very black backgrounds for music. I made my own "high definition" grounding cables.
Synergistic Research Black Box
The Black Box is a Low Frequency Resonator Array that works in conjunction with the Subwoofers, Atmospheres and FEQ X4 to solve bass node issues.
Synergistic Research ART System
This is Synergistic Research's older acoustic system that's based on resonators. It works very well with their current UEF system and provides excellent results. Complete ART systems are getting hard to find.
The UEF Panels, UEF Dots, Black Box, Risers, ECT and GCT are all types of sound resonators. I use an Atmosphere XL-4 (green ATM), Atmosphere (red ATM), FEQ X4 (2) (red ATMs) and Mini-Atmosphere (green ATM) - when used with the Synergistic Research control software they generate various frequencies of Schumann Resonances around the room. Bottom line they work: create a huge/realistic listening experience!
Townshend Audio Seismic Isolation Podiums
These decouple and "float" your speakers on a spring-loaded metal base. It opens-up the sound and adds solidity to the bass but doesn't make the sound harsh like most metal speaker bases.
Akiko Audio Tuning Stick; Kemp QA Plug (2) and Zero One (2)
The Akiko Audio, Kemp and Zero One products treat the signal and power in my system keeping the electrons spinning around the electronic signals as uniform as possible or by adding more standard frequency Schumann Resonances. These products are excellent at making your system sound more "natural".
Synergistic Research Tranquility Bases and Tranquility Pod
I use original MIGs under the Tranquility Bases.
Puritan 156, ADD-Powr Sorcer and ElectraClear EAU-1
The Puritan is an excellent line conditioner. The ADD-Powr and ElectraClear devices actually add electromagnetics (EM) to the AC line using an active circuit and algorithm. Contrary to popular belief not all EM is bad for sound quality in stereo systems. The proof is in the listening.
Puron AC Line Conditioner
I use this in the first outlet of my Synergistic Research power conditioner. It gives a more realistic presentation of vocals and reveals a little more texture and impact to the bass.
Stein H2 Harmonizer system
I have 4 Stein H2s in my system.I went with one in each of corner of the room with a Stein stone at each and a Stein diamond on the ceiling in the center of the room. They add layers and layers of depth with each vocalist/instrument being in their own separate but integrated spaces.
Tombo Audio Lotus Harmonic Enhancer
The bell on the top gives high resonance frequency while the tip on the top of the bell performs as a wave guide streaming high frequency up to the ceiling.
Swiss Digital Fuse Boxes
The Swiss Digital Fuse Box replaces the fuse in your component with a pure copper "sluggo". The "sluggo" comes in various types depending on what coating, if any, is applied to it. The bottom line it allows much more current to flow into the electronics which is especially important with high current power amps. Every part of the sonic presentation is enhanced. I now use one on my power amp, DAC and streamer.
This company has now closed because the owner has passed away. These products work to achieve a uniform and consistent RF/EMI and electron treatment around my components which greatly helps the sonics.
Audio Magic Pulsed Electron Alignment
The PEAs are battery powered. Spintronics is the ability to control or manipulate how electrons spin. Electrons spinning around electronic signals carry audio information. The goal of the PEA devices its to get the electrons spinning as uniformly as possible. It opens up the sound and makes subtle cues in the music even more real.
Timbernation and Bright Star Audio Platforms
Solid maple platforms stained cherry for electronics and Bright Star platforms for the subs.
Sounds like a really enjoyable evening! Are you considering any other setup configurations...for kicks? Sub in between or, dare I say, a horizontal one? : )
Scott, it's a pleasure to read your updates and follow the evolution and progress of your system. Very cool!
On another note, I installed a Synergistic Black duplex and have the Corelli direct into it and have placed it in the audio console alongside my other components. Can't report on differences because the SR Black duplex is still breaking in...but the system sounds terrific. : )
Thanks for your suggestions regarding the Corelli.
Looking forward to learning about how the graphene oxide solution keeps working and if / when you decide to apply the TC.
Thanks, Scott. Keep me posted on any additional findings. I'll follow that thread, also. If I can get it in rack and it performs the same as where I have it currently, it will be a win aesthetically, also!
Scott, if you tried and did not hear any difference then that's good. The advice I was given was to keep it as far away from the main components as the power cord allows. Once my system settles I will try other placement options and drop you a note if I find anything of significance.
You are welcome, Scott. Hopefully your friend follows your advice and goes with the changes you suggested and made.
I'm waiting for two components to be shipped to me. Once they are run in and settled, I will start fine (hyper) tuning speaker placement and working on peripheral adjustments/changes. I'm curious as to what (and the degree of) additional improvements are waiting to be discovered and realized.
Awesome setup results and writeup! Your findings would be really helpful to others on the Tekton thread. Hope you can get your friend's permission to post there or for him/her to post directly.
Positioning, Placement, Cabling, Amplifier related improvements across the board. You hit gold! : )
The T+A is scheduled to be delivered tomorrow. I have never had a component of that calibre and pedigree in my system. I's hard to imagine how the sound quality can improve but I continued to be surprised. I'm one of the few going the SS route, so this will be a very interesting audition. I will post once I have a grip on it.
