99dB eff. with active subs powered by 300W Class A/B amps 20Hz-70kHz FR

Silver foil

KT88 Push Pull 110Wpc Modified/updated by Kevin at VAC to latest

1 meter

Balanced Phono/Line Preamplifier - only 2 gain stages/Bipolar transistors - RIAA eq. deviation from 20 to 20kHZ is .009dB - signal to noise ratio over 80db - Low cut filter selectable between DC, 16 and 32 Hz - switchable 3.18 us turnover point to compensate for the cutting head preemphasis roll-off - common mode rejection: -150db - output impedance: 75(RCA)/150(XLR)Ohms - direct coupled - fully balanced input to output - distortion: 0.0002% - frequency response: 0.01 to 1 Mhz - Clean gain: Adjustable to 100 db - Dual Mono design with separate power supply - Zero negative feedback - true segmented ground plane - fully regulated input to output - Front panel controls = Mute, Phase reversal, Mono, Power - Dual Volume controls: The volume control attenuates the audio signal and the stage noise at the same time, resulting in outstanding signal-to-noise ratios and dynamic range. For every volume position, there is only one resistor defining the quality of the amplified signal -capacitance loading adjustment for MM inputs via rear panel - 4 line inputs: 2 XLR and 2 RCA - 1 MC phono input(both XLR and RCA) - 1 MM phono input(both XLR and RCA)

aluminum/teflon/lead shot and oil platter

Pertinax armwand with Reference SQ magnets shaped to reduce changes in vertical tracking force with changes in vertical tracking angle. I use it with a Teres VTA adapter and Bocchino XLR's.

mounted on the Schroeder. Platinum coils. Still our fave...

A tonearm that makes everything easy.

Din to XLR

p-mount

Integrated headshell. New suspension from VdH.

Integrated headshell

Integrated Headshell

P-mount Moving coil

NOS

bought used

NOS

NOS

Bought Used

NOS

NOS

NOS

mm

mm

Solid state tape repro amp and phono preamp. Cello design built by Charles King.

up to 30ips Reel to Reel 1/4" 2 track

modern tuner

APL modified

Like a vibraplane, fed by a nitrogen tank. Sits under the TT.

holds my amp and turntable

mahagony and SS

Bocchino XLR's

4 of these

8 of these for bass trapping and first reflections.

8 of these for diffusion

Vacuum record cleaner - it works great, but it's a heck of a chore cleaning every album:-).