Ozzy System

by ozzy on Opinions Please
My watch dog baby
Watch Dog Grown up
8-2-24
8-2-24
8-2-24

Description

New photos added 8-2-24
Read more...

Room Details

Dimensions: 26’ × 17’  Large
Ceiling: 8’

Components Toggle details

    • LUMIN X1
    Very impressed, especially with the Leedh volume control. No preamp needed.
    • Clarisys Minuet
    Just installed on 8-29-23. replaced my beloved Focal Sopra 2's.
    • Rotel Michi 8
    Just added these 140 lb. amps. Rated for 1800 watts per 4 ohm.
    • JL Audio F-113 Subwoofers (4) of them.
    4 F-113's
    • AudioQuest Cables Mythical Creatures Cables Complete Loom
    Niagara 7000, 1200, 1000 Power conditioners. 

    Power Cords
    2 AudioQuest Dragon Power cords on my Mono Block amps.
    1 AudioQuest Dragon Source on my Lumin X1
    1 AudioQuest Dragon Power Cord on my Niagara 7000 Power Conditioner.

    On my 3 dedicated lines for a total of 4 AudioQuest units. I have (2)1200 for my JL subs. 2 are in the back of the room and 2 in the front
    . 
    Interconnects - Firebird XLR 
    Speaker Cables -Thunderbird speaker cables Zero & Bass.

    For a Complete Loom of All AudioQuest cabling and Conditioners.
    • AudioQuest 7000, (2) 1200, 1000 Power Conditioners 7000
    • AudioQuest Cables Dragon, Firebird, & Thunderbird
    All Dragon power cords on amps, conditioners and Lumin X1
    Firebird interconnects, and Thunderbird speaker cables.
    • Critical Mass Systems Center Stage CM2,2M in both the 1.0 & 1.5 size footers. Total of 6 sets being used.
    I now have 6 sets under my equipment and boy are they impressive.
    • Entreq Silver Tellus
    Silver Tellus used om my digital. Plus a DIY large box used on analog and two smaller DIY boxes used on each speaker.
    • EtherRegen Uptone Audio
    • AfterDark Queen Clock and Linear power supply
    Combo

Comments 196

Sign in to comment
Hi Ozzy,
Do the MC-0.5's lower the noise floor like a power conditioner or is their function to enhance sonics?
I love my HF digital cable. 

Many thanks, Jim 

lowrider57

Owner
frozentundra, Jeff,

Sorry it took a while for me to respond. 
The Sopra's are the best I have heard within my system and budget. And yes, that is a Lions throw rug...it likes to be walked over...
Merry Christmas!

ozzy

ozzy

Great Ozz;

It appears you have gone thru a string of speakers, equipment

I see you just added some Sopra #2’s 
My audio buddy just bought his

How do they compare to your past speakers 

Is that a Lions logo?

Jeff

frozentundra

Hey Ozzy, do you have a pic of the inside of your CPT 1800? I'm curious to see how you connected the receptacles to the transformer. I'm wondering if using a push in wire connector would work for all the hot and neutral connections to the transformer.

t_ramey

hey Ozzy,

I heard u say you coneccted PS Audio's DSD to the Passlabs  x350.8 I what to know how you regulate the volume on Pass X350.8 through the wheel on the front or preamp that you have? can you regulate  the volume on this amp directly?

devi

Sgordon1

To email me put a zero, (after the above beginning)
and send to my hotmail account.

I have sleeve pictures for you,
Spencer

sgordon1

Owner
jond,

Sorry about the late response. I really enjoy the Atma-Spheres. But, I want to try some other speakers such as Planers or Electrastats  that I know have very difficult impedance and sensitivity requirements.

ozzy

ozzy

@ozzy I just saw your Atma's for sale and was shocked! Actually I wasn't shocked at all as I dubbed you the tinkerer :p. So what's the next move?

jond

Owner
chazzy007,

I know the room pictures are dark, sorry I use that room also for home theater so the walls are painted dark grey and the carpet is also.

ozzy

ozzy

Very nice system Ozzy! Pic of your complete system is a little dark though. Impossible to see everything clearly.

chazzzy007

Owner
lak,

They are in the pictures on the stands.

ozzy

ozzy

Looking good Ozzy!
Where are those DIY speakers?

lak

Owner
Well, I just got done replacing the Aurum Cantus woofers with ScanSpeak Revelators in my DIY speakers.
I must say the ScanSpeak play way better in my sealed cabinets. Especially in bass response. 
ozzy

ozzy

Beautiful Westie!  My boy is almost 13 years old, named Nipper.  Fabulous family member!

hifiman5

Hi Ozzy,

Do you have any left over Synergistic Research HFT's DIY  guys you want to sell?

Gary

glory

Nice system -- are you still using the GPA Amp Stands? If so have you tried getting the Apex ball footers? I recently added these to my stands under my power amps and the effect was substantial (cleaned up hash and made the amps seem less loud (i.e. I needed to up the volume) presumably as it removed some nasties)

The Apex' are very expensive but often available used. I also upgraded to the SiNi balls which is a good value further add on

folkfreak

Owner

Well, the Aurum Cantus C165/50C2C 6-1/2" Midwoofer is actually a 7" woofer. I found it out the hard way when I took out the 6 1/2" Pyle for the Aurum Cantus.

I find the transition from ribbon to midwoofer to be seemless although I did have to pad down the Ribbon with some Mundorf resistors. Check out the specs on the Aurum drivers on Parts Express.

ozzy

ozzy

Hey Ozzy.

Great to see another Audiogoner going into DIY speakers! I'm working on a speaker with some similarities to yours and wanted to pick your brain: how do you find the balance of the dynamics from the G1 vs the 6.5" midwoofer?

My system is 4-way active xo, with a ribbon atop (Beyma TPL-150H) from 2kHz and up, midrange in the works but experimenting with Faital Pro 5" in a waveguide starting around 400/500Hz, dual 10" from 80Hz, subs below.

TPL-150 is very dynamic and I want a midrange to match it. I felt a single direct radiator had to be at least 8" to deliver enough dynamics but they beam before 2kHz and are scarce. MTM with two 5" would generate lobbying, so trying with a waveguide. 

Seeing your design makes me revisit my decisions, though.

lewinskih01

Owner

DIY Speakers, changed mid woofers from Pyle to Aurum Cantus C165/50C2C 6-1/2" Midwoofer. I used all Mundorf Supreme Silver, Gold, Oil caps. Mundorf resistors and Janzten foil inductors in a external crossover box 2,000hz @12db.

I am now using a DEQX Preamp unit that has a electronic crossover built in. With that, I have (2) JL Audio F-113 subs crossing over at 80hz to relive the low frequencies from the DIY Speaker.

ozzy

ozzy

Owner

All of my cables have been changed to Cerious Technologies Graphene Extremes!

My watch dog really likes them.

ozzy

ST 》계룡출장안마 계룡출장마사지▶☏O1O↔4649↔1257◀대전출장마사지 i유성출장마사지 i신탄진출장마사지 i조치원출장마사지 i청주출장마사지 i계룡출장마사지 i공주출장마사지 i논산출장마사지 i금산출장마사지 i옥천출장마사지 i오창출장마사지 i세종출장마사지 계룡안마 계룡마사지

neo9744

I'm just here for the puppy pics :)

jond

Hi Ozzy,
Your dog is the coolest thing I've seen on Agon in a while. Has the best ears too! Cheers,
Spencer

sbank

Cute pup, thanks for posting :)

albertporter

Owner
My Watch Dog Grows Up

ozzy

Showing 51 - 75 of 196 posts
  • 133.9K
  • 196
  •  4
Similiar items on Audiogon
© 2024 Audiogon.com