With upgraded X over, Duelund 12g tinned copper from binding post to crossover. Crossover to drivers.
Duelund Silver Foil 2.0 on the tweeter and 3.0 for the woofer
Duelund Silver Foil Bypass cap and CUTF on the tweeter
Mundorf MKP and Obligator Gold for the remaining caps.
Dynaudio Stand 6, had a larger top plate made to give better support of the S25,s along with adding Alto Extreme Classic feet for the speakers to rest on.Replaced the small spikes on the stand with Takaudio feet and if you look closely you can see the bearing I installed on the takaudio feet to further isolate the speakers with great imaging.
Digital components have there own 20 amp dedicated circuit using Acoustic Revive EE 2.6 solid core copper ( 10 G) in wall wire to Furutech GTX R NCF outlet, Furutech wall cover and 105 NCF cover.
Both the amp and preamp have there own seperate 20 amp dedicated line using 8 gauge solid core copper to Furutech GTX R NCF outlet, wall plate and 105 NCF cover.
Previously I had standard 10 gauge stranded wire, while this was ok the above changes in the dedicated lines especially the 8 gauge solid core to amp and preamp made SIGNIFICANT improvements in focus, authority, soundstage and ease of presentation to the music. To be clear, both the amp and preamp have there OWN separate 8 gauge solid core wiring and outlets. This made an incredible audible improvement for $100.00 US dollars. The Acoustic Revive EE 2.6 wire was significantly more ( $100.00 a meter) but I wanted digital and analog components on different circuits.
I cant recommend highly enough for anyone to upgrade from standard 10 gauge stranded wire to 8 gauge solid core copper for your analog gear.
