Mike Lavigne's System

by mikelavigne on All Out Assault
the big rig.
left rear corner view--note the ceiling treatment
note the cloth surface treatment on the ceiling.
view from behind the speakers
sources +
84" tall, 575 pound main towers and 87" tall, 600 pound bass towers.
bass towers are powered and adjustable, main towers passive.
rear of the room.....
amps sitting on Taiko Tana active isolation platforms
NHB-468 sound amazing......liquid and amazing musical flow and texture.
meters on the 468's
new Massif Audio racks, plus Nordost footers.
2 turntables, and the Taiko Tana active device under the Esoteric T1, made a solid improvement in the performance.
Wadax Reference Dac and Power Supplies with RevOpod footers
Wadax Reference Server and Ref Power Supply with RevOpods
darTZeel NHB-18NS w/ 2 phono stages (new 2016 version)
Ampex ATR-102's + Ampex MR-70 preamps, on new Massif Audio racks, boosted performance.
Esoteric T1 power supply & Esoteric G1X Clock
1/2" playback only ATR-102 hot rodded
Ampex MR-70 tape pre hot rodded by ATR Service INC
Wadax Akasa optical (yellow) and power supply (red) cables.
1/4" playback only ATR-102 hot rodded
air box for CS Port tt; dead quiet.
Etsuro Gold MC cartridge
Etsuro Gold MC cartridge
DaVa Reference Field Coil phono cartridge
Audio Technica MC-2022 phono cartridge
CS Port linear tracking tone arm with air bearing
Primary Control 12" FCL tone arm
Durand gimbal bearing tone arm
Durand Tosca gimbal bearing tone arm
Glanz MH1200S tone arm + Sumile Mono cartridge.
power supplies for the DaVa field coil cartridge and field coil FCL tone arm.
Massif Audio Design Snakewood record weight.
love my new Massif Audio design racks.
Evolution Acoustics bass tower interface and adjustments
cables and various cable decoupling strategies.
Tripoint Audio Elite grounding box for sources.
Tripoint Audio Troy Signature for amps
Entreq Poseidon + Atlantic Minimus + Everest knobs
linear power supply for the Taiko Tana active platform under amp
3 linear power supplies for Taiko Tana active under sources
Equi=Tech 10WQ wall panel A/C transformer with door open
Klaudio RCM + Equi=Tech with door closed.
the audio barn

Description

this room and system is the result of 10 years in High End audio. my system has been stable for a couple of years (except for transport and amplifier upgrades within the same brand). the room has been in the planning stage for about 18 months and i actually moved in a little over a month ago.

my audio philosphy is to have the system get out of the way of the event. i like as pure and simple a signal path as possible and, at this point, prefer passive to active gain stages. i love all the formats and enjoy having lot's of music.....vinyl is my favorite but i listen to at least 60% digital. the new room really reveals the benefits of SACD over redbook.

the system and room truely allow the event to be recreated before me. i love the way the speakers disappear and i am transported to another place/time.

i have choosen my cables, sources, amps, speakers to have as little of their own sound as possible.

recently, i upgraded my digtial transport from the modified Philips SACD 1000 to the new emmlabs CDSD.....this was a significant step upward in performance.

i have written an article in Positive Feedback regarding my room building experience.....here is a link;

http://www.positive-feedback.com/Issue16/lavigneroom.htm
Read more...

Room Details

Dimensions: 29’ × 21’  X large
Ceiling: 11’

Components Toggle details

    • Evolution Acoustics MM7's
    twin towers, 600 pounds each, main passive tower, 82 inches tall, active bass tower, 84 inches tall.

    passive main tower, 97db, 7 ohms, so easy load. active bass tower has 4 analog adjustments for ideal room integration.
    • darTZeel NHB-468
    Mono block Amplifiers. amazing first watt, transparent and rich tonality. great match for my speakers.
    • darTZeel NHB-18NS with 2 internal phono stages.
    battery powered preamp with 2 separate phono stages. uses BNC 'zeel' cables between pre and amps.
    • Evolution Acoustics 7.5 meter 'Zeel'
    7.5 meter pair of BNC cables from preamp to amps.
    • Evolution Acoustics 'System' speaker cables--10 feet
    new version of these cables, a big step over the amazing TRSC model i have used for 10 years. fantastic performance.
    • WADAX SA Reference DAC
    Wadax Reference Dac----state of the art dac with 2 separate power supplies. the best dac i have heard by a good margin. below is a link to a thread about my Wadax experience.

    https://www.whatsbestforum.com/threads/wadax-reference-dac-and-server-arrive.34173/#post-771357
    • WADAX SA Reference Server with Akasa optical interface
    ultimate state of the art music server using Roon. includes the Akasa optical interface.
    • WADAX SA Reference Server power supply
    additional chassis power supply to improve the Wadax server performance.

    https://www.whatsbestforum.com/threads/wadax-server-psu-unit-has-now-arrived.36722/page-6#post-948318
    • WADAX SA Akasa DC cables (3)
    replaces the standard DC cables. takes the performance of the Wadax Reference system to 'Level 4' for ultimate performance. Red in color.

    https://wadax.eu/akasa/

    https://www.whatsbestforum.com/threads/wadax-server-psu-unit-has-now-arrived.36722/page-9#post-971100
    • Arya RevOpod isolation footer (32 used under the 5 Wadax Chassis).
    height and tension adjustable. the Wadax dac, server, and server power supply chassis all use 8 footers, so it's critical to be able to adjust height and tension to have an even support for optimal performance. RevOpod's are unique in those attributes making them ideal for this use.

    https://www.arya-audio.com/revopod
    • CS Port LFT1 turntable w/arm
    air bearing platter and air bearing linear tracking arm; string drive with zero feedback dc motor, low pressure, low flow air system with zero noise air box.

    world class musical flow, nuance and delicacy, combined with authority and ease. serves the music completely.
    • Esoteric T1 Turntable
    magnetic drive/rim drive idler turntable with torque adjustment.

    with the deletion of my NVS turntable, i was able to move the Taiko Tana active isolation shelf to under the Esoteric T1. this has upgraded the performance of the T1 significantly. objectively small changes, but musically quite profound up tics in realism and immersion. more nuance, greater music focus, better bass articulation. 

    https://www.esoteric.jp/en/product/t1/top
    • Esoteric G1X Master Clock
    Master Clock Generator for speed improvement for the T1 turntable. significant improvement in music realism.

    https://www.esoteric.jp/en/product/g1x/top
    • Durand --Tosca tonearm.
    gimbal bearing design. Tosca is on the Esoteric T1 turntable
    • Primary Control 12" FCL tone arm
    Field Coil Loaded uni-pivot tone arm. with power supply. mounted on the Esoteric T1 turntable. amazing natural and very high resolution tone arm. link below.

    https://www.primarycontrol.nl/Field_Coil_Loaded_Unipivot_Tonearm.html
    • Glanz MH-1200S 12" tone arm
    12 inch tonearm, stainless steel. used for the Sumile mono cartridge.

    https://glanz.tech/e/collection/mh1200s1000s900s/
    • Experience Music/Intact Audio phono corrector + silver wound MC Trio SUT combo for three different tonearms.
    bespoke tubed phono preamplifier. silver wound, with custom dual power supplies.

    https://myemia.com/LR.html
    • LFD -3- Phono Cables DIN to RCA
    3 sets of very high performance phono cables. amazing performance. built by Dr. Richard Bews in the UK.

    one cable uses a DIN to RCA short Dongle + an RCA to RCA interconnect. the Dongle improves the performance of the DIN connection. details at the link below.

    https://www.whatsbestforum.com/threads/lfd-cables-phono-and-i-c-from-the-uk-cables-as-components.31243/
    • DaVa Reference cartridge
    field coil cartridge. with tube power supply.
    • two Etsuro Golds, ---a pair of Reference MC Phono Cartridges.
    duraluminim (A7075) body, 24 carat 'Kinpaku' Gold Leaf finish, diamond cantiliver. .3mv output, 4 ohms. these are both special versions of the Etsuro Gold.

    one is mounted on the CS Port linear tracker.

    one is mounted on the Primary Control FCL arm.

    finest cartridge i have heard by a significant margin. WOW!
    • Audio Technica MC-2022 60th Anniversary cartridge
    uses the unified stylus cantilever design. which results in extreme lack of distortion and linearity. remarkable neutrality and ability to dig out detail and keep it natural and musical.

    https://www.audio-technica.com/en-us/at-mc2022
    • Murasakino Sumile Mono phono cartridge
    MC cartridge for mono records, .04mv output. tracking force 3gms. finest monaural cartridge i have heard. competes on musical refinement with the top stereo cartridges. 

    https://murasakino.audio/en/products/sumile-mono.html

    Mounted on the Glanz MH-1200S tonearm. mounted on the Esoteric T1 turntable.
    • DS Audio Ion 001 Vinyl Ionizer
    generates positive and negative ions to remove static charge from vinyl records. 

    https://ds-audio-w.biz/products/181/
    • CS Port Static Eliminator IME1 (two of them)
    An unprecedented accessory focusing on cartridge friction. It suppresses the effects of static electricity and makes records clearer.

    one is on the CS Port tt, one on the Esoteric T1 tt.

    https://www.csport.audio/products/products-ime1-en.html
    • Stage III Concepts 1.5 meter XLR set of Gorgon interconnects.
    high performance interconnects. used from the Wadax Reference dac to the darTZeel preamp.

    http://aaudioimports.com/ShowProduct.asp?hProduct=283
    • Ampex twin ATR-102----one 1/4" and one 1/2" reel to reel master recorder
    hot rodded by ATR Service Inc----Andrew Kosobutsky. significant upgrades over stock. each interfacing with hot rodded Ampex MR-70 preamps. the new tape deck performance standard in my opinion.

    https://www.whatsbestforum.com/threads/ak-hot-rodded-ampex-atr-102s-w-mr-70-preamps-replaces-my-studers.36288/
    • Kosobutsky 1.5 meter set of RCA interconnects + 8 meter set of XLR interconnects.
    1.5 meter set of RCA interconnects are used between the EMIA phono corrector and the darTZeel preamp.

    8 meter set is used between the Ampex MR 70 tape preamps and the darTZeel preamp.
    • Nordost QRT QNET network switch
    Network switch, with Nordost Qsource power supply.

    https://www.nordost.com/qrt-audio-enhancers.php
    • Synology 30 Terabyte NAS (a pair = 60 TB) music file storage
    mirroring music storage for my music files.
    • Massif Audio Design Audio Racks, solid wood
    2--double wide 3 shelf racks for sources

    1 single wide rack 4 shelf rack for Ampex MR-70 tape preamp chassis.

    https://www.massifaudiodesign.com/racks
    • Nordost Sort Fut rack footers (3 sets of 4)
    mechanically tuned resonance control device. supporting the three Massif racks.

    https://www.nordost.com/sort-systems/sort-fut.php
    • Taiko Tana (5 of them) Herzan TS-150 (2) + TS-140 (3)
    active isolation under 5 separate components: (1) the NVS turntable, (2) the MSB dac, (3) the darTZeel preamp, (4 + 5) both darTZeel mono block amplifiers. custom modifications by Taiko Audio add a linear power supply plus panzerholtz top layer + Daiza platform to provide full frequency resonance attenuation to each platform.
    • Taiko Audio Daiza isolation platform--22 used in the system
    Panzerholtz Platform with spiral cutouts reducing mid and high frequency resonance while retaining life and energy and not changing tonality.

    22 Daiza platforms in the system of various sizes under every piece of the signal path.
    • Evolution Acoustics 'system' power cables
    a new version of the TRPC model i used on my darTZeel 468 mono blocks for the last 10 years. a big step up.
    • Sablon Audio King power cord
    used on the Wadax Reference Server power supply.

    https://www.sablonaudio.com/power
    • Absolute Fidelity power interfaces
    power cords specifically designed for either motors (tt and tape decks), amplifiers, and components. 11 in the system.
    • Tripoint Audio Troy Signature
    Grounding box for chassis grounding the darTZeel 458 mono block amplifiers + grounding the passive main towers of the Evolution Acoustics MM7 speaker system.
    • Tripoint Audio Elite
    Tripoint Elite grounding box. this does chassis grounding for my sources. it uses a a pair of Tripoint Thor SE Master Reference ground cables for my dart preamp and the MSB Select II dac. there are also 4 Signature Silver ground cables to the two arm boards of the NVS tt, the power supply of the NVS tt, and the SGM server.
    • Equi=tech 10WQ
    10kva balanced Isoltion transformer and distribution panel.
    • Furutech GTX-D NCF Rhodium duplex outlets
    10 in the system. used with 10 Furutech covers and frames. uses NCF (nano crystal formula) material to reduce noise by emitting negative ions.
    • Wave Kinetics A10 U8 decoupling footers
    8 sets-of-4 in the system for individual tuning of each piece of gear.
    • Auralex T-Fusor diffusers
    i use 20 of these. 6 each on the front side walls, and 4 each front ceiling and rear ceiling.
    • Klaudio Record Cleaning System
    automatic record cleaner
    • Acoustic Revive RL-30 mKIII CD-LP demagnatizer
    for demaging any disc.
    • Furutech DF-2 LP disc flattner
    will remove warps from Lps
    • Audiodharma Cable Cooker, Anniversary Ed.
    will cook any cables
    • Winds ALM-01 Stylus Force Gauge
    easy accurate, repeatable, measurments.
    • i-Tower by Koncept LED floor lamp
    (3) are used. best audio light ever. 2 'warm', 1 'cool'.
    • Quietrock THX 545 drywall
    specialized drywall with a 1/4" metal layer. used in my front sidewalls to establish proper room boundaries.
    • Barn.... ......room is....
    ....most of the ground floor. 29' x 21' x 11'.

Comments 3397

Showing all comments by theaudioassociation.

View all comments

Sign in to comment
Mike.... I've had the luxury of spending a few hours in my sound room enjoying some great tunes. During my listening sessions I started reading your posts from the beginning til about Sept. 2010. Ran out of time due to it being Father's Day. Happy Father's Day btw!

I can't tell you how much I've enjoyed reading about your audio journey. I've been through quite a journey myself. Different but none the less a journey that has been filled with lots of education and appreciation of music and gear.

Just wanted to say "Thanks!" for sharing......

Can't wait to hear about the MM7's!

My MM2's/NVS/DarTZeel/PD/Studer A80/ATR-102 is sounding better than ever! JT was gracious enough to come over after Newport to do some tweaking with the MM2's.

Enjoy Father's Day Mike!

theaudioassociation

Looks great Mike! This is one of those "Someday!" upgrades to aspire to.

In the meantime I'm going to do the larger halo upgrade and save some pennies.

Have fun!

theaudioassociation

...."I also have two separate phono's in my pre but I ordered with one MC and MM, could always send it back and have the MM converted to a MC but Kevin has been working on a Reference phono which I'm awaiting to hear so we will see. "

A new reference phono? Do tell!

theaudioassociation

Hey Mike!

Checking in to see how things are progressing with the Equi=tech? Also, what's your current thought on your record cleaner? Still doing a great job on the vinyl?

Thanks!

Ed

theaudioassociation

Mike, run out and get the Avatar Soundtrack. Great dynamics and slam! Sounds great on my humble system and should rock on yours!

Have a great weekend!

Ed

theaudioassociation

Hello Steve! Thanks so much for the info! Beautiful workmanship on your plinths and tables!

Ed

theaudioassociation

Mike... you're killing me! Haven't been able to get the monoblocks out of my mind since Vegas. You are so right in regards to the workmanship. They are one great piece of gear.

I might be one step ahead of you on the "sell to the wife" thing..... Teresa really liked the color scheme versus my black Sig's..... Of course she has no idea how much the cost! That might be a bit of a problem but at least she likes the way they look! Bet they'll sound ridiculous with your setup!

That Dobbins 301 was gorgeous. Wonder what that baby is going for????

Have a great long weekend!

Ed

theaudioassociation

Mike, hope you're feeling better today! Glad to hear that you made the best of it and locked yourself in your sanctum to convalesce. My A90 has only about 20 hours on it but I have to say, I'm hearing so much more than ever before. I'm sure the MM2's have a lot to do with it as well.

Take care and hope you're back in one piece soon. Enjoy the holidays!

Ed and Teresa

theaudioassociation

Hi Mike!

Our Thanksgiving was great and hopefully yours was as well! The MM2's are not spiked yet. Trying to get a bunch of hours on them prior to making final placement adjustments. They've been running in 24 hours a day for the past 4 days. Got a long ways to go before I can get to the 1,000 hour mark.

Been really enjoying the tunes! You're right about the non-fatigueing sound! Just incredible!

I'll keep you posted!

Eddie

theaudioassociation

Hey Mike!

All went as planned and I've got a pair of MM2's producing some great music! Probably only have 8 hours on them so far but I have to say..... what a difference versus my Maxx 3's. I could never get the Maxx's to produce satisfactory bass in my room. No matter where we moved them they just couldn't muster up any oommph. These MM2's are unreal in the bass region. I've got the settings at flat and they just stomp all over the Maxx's. The entire presentation is so different. I've been listening to alot of my favorite discs and records and enjoying experiencing them all over again.

I've got to do some tweaking with the speaker setup. Did some toe adjustments earlier today along with making sure they were at the same distance into the room, etc..... I'm not the best at this stuff so I'm sure these MM2's could sound even better with some expert tweaking.

The A90 is pretty amazing. I think I've got maybe 15 hours on it so far. Again, it's such a different presentation versus my Benz LP. I'm in total agreement with you .... 'truth sayer' it is! Just had Ray Brown - Soular Energy playing and I could really feel the weight of the bass, never got that from the Maxx's.

Going back to the tunes.... I'll keep you posted on the developments.

Happy listening!

theaudioassociation

You got it Mike! Full report to follow!

theaudioassociation

Hiya Mike!

Well.... haven't really fired up the system in a while. Work is killing me. But...... if all goes as planned, might have a reason to have an all day listening day on Sunday. MM2's might land on Saturday! Got my fingers crossed!

theaudioassociation

Hey Mike!

Got my A90 mounted... by Brooks and Brian Berdan. Did an excellent job. The cartridge sounds very different from my Benz LP. Gotta put some hours on it but out of the box it sounds pretty good!

How are you feeling? Got the bug out of your system yet?

Ed

theaudioassociation

Mike, congrats on getting your Dart's back. Sounds like the upgrade was a huge success!

Just got the A90 mounted up today. So far it's very impressive! I know I've got a ways to go before I get to the real juicy tunes but I have to say I like what I'm hearing with only a few hours on it.

One question I have is what load setting on your phone stage you're using. I only have the following setting available:

MC: 100, 250, 470, 1K, 2.5K, 4.7K, 47K

I believe the specs say to use > 10 Ohm. I'm not the sharpest tool in the shed so I'm at a loss on what setting to choose.

Hope you're feeling better!

Ed

theaudioassociation

Oooohhh, new boards! Can't wait to see what your thoughts are when you get them back!

Take it very slow. Had pneumonia 2 years ago and now any time I've got an inkling that there's something funny going on in my lungs I have to go right in and get it checked out. I'll never go down that road again! You're doing it right. Rest, rest and more rest!

Ed

theaudioassociation

Mike,

Very interesting... I got sick around the exact same time you did. Mine was some sort of viral thing floating around in my lungs. Still lingering but I feel lots better. Hope you do as well!

Jonathan says I should have the cartridge in a couple more weeks. Can't wait to see how it measures up in my new system (MM2's).

Take it slow Mike!

theaudioassociation

Mike, thanks for the great write up on the A90. I'm eagerly awaiting mine from Jonathan at Chambers.

Talked with Dr. Chris Feickert at the end of his workshop with Fremmer. He said that the A90 was the best cartridge he's heard. He made sure to mention that he's heard many a cartridge and this A90 was something very special.

Also got Chad at Acoustic Sounds to recommend some new vinyl. So needless to say, Teresa and I were carrying some prized treasures back on the plane.

Also eagerly awaiting my MM2's! Hopefully in a couple more weeks!

Happy listening!

Ed

theaudioassociation

Mike,

Thanks so much for your advice. I'll buzz VPI in the am to see if they'll give me the info I need.

I'll keep you posted!

Ed

theaudioassociation

Mike....

Thanks very much for the Mint LP info. I guess I'm on the right track as I've already traded a few emails with Yip. The only thing Yip and I haven't verified is if my VPI 12.6 arm is the same as a 12.5 which he has a protractor for. He says that no real data has been published by VPI on my particular arm so it sounds like it might be a bit of a gamble. My only concern is that if it isn't correct I'd like to put the setup back to factory settings and I'm not too sure I've got the expertise to pull that off.

I may just bring my rig to my local dealer Brooks Berdan and have him mount it up. Sure would like to be able to develop my cartridge mounting skill though. Just don't know if I want to use the A90 as a practice piece.

BTW, you are more than welcome for the Scotch!

Ed

theaudioassociation

Sorry, forgot to tell you that I've got a pair of MM2's on their ways as well!
Lots to look forward to!

Ed

theaudioassociation

Hey Mike!

Got an A90 coming my way as well. Will try and mount it myself on my HRx. I'm hoping I don't screw it up. What sort of gadgets do you have that help you get these cartridges right on all of your setups?

See you in a couple of days!

Ed

theaudioassociation

  • 13 Million
  • 3.4 Thousand
  •  62
© 2025 Audiogon.com