this room and system is the result of 10 years in High End audio. my
system has been stable for a couple of years (except for transport and
amplifier upgrades within the same brand). the room has been in the
planning stage for about 18 months and i actually moved in a little over
a month ago.
my audio philosphy is to have the system get out
of the way of the event. i like as pure and simple a signal path as
possible and, at this point, prefer passive to active gain stages. i
love all the formats and enjoy having lot's of music.....vinyl is my
favorite but i listen to at least 60% digital. the new room really
reveals the benefits of SACD over redbook.
the system and room
truely allow the event to be recreated before me. i love the way the
speakers disappear and i am transported to another place/time.
i have choosen my cables, sources, amps, speakers to have as little of their own sound as possible.
recently, i upgraded my digtial transport from the modified Philips
SACD 1000 to the new emmlabs CDSD.....this was a significant step upward
in performance.
i have written an article in Positive Feedback regarding my room building experience.....here is a link;
new version of these cables, a big step over the amazing TRSC model i have used for 10 years. fantastic performance.
WADAX SA Reference DAC
Wadax Reference Dac----state of the art dac with 2 separate power supplies. the best dac i have heard by a good margin. below is a link to a thread about my Wadax experience.
Arya RevOpod isolation footer (32 used under the 5 Wadax Chassis).
height and tension adjustable. the Wadax dac, server, and server power supply chassis all use 8 footers, so it's critical to be able to adjust height and tension to have an even support for optimal performance. RevOpod's are unique in those attributes making them ideal for this use.
https://www.arya-audio.com/revopod
CS Port LFT1 turntable w/arm
air bearing platter and air bearing linear tracking arm; string drive with zero feedback dc motor, low pressure, low flow air system with zero noise air box.
world class musical flow, nuance and delicacy, combined with authority and ease. serves the music completely.
Esoteric T1 Turntable
magnetic drive/rim drive idler turntable with torque adjustment.
with the deletion of my NVS turntable, i was able to move the Taiko Tana active isolation shelf to under the Esoteric T1. this has upgraded the performance of the T1 significantly. objectively small changes, but musically quite profound up tics in realism and immersion. more nuance, greater music focus, better bass articulation.
https://www.esoteric.jp/en/product/t1/top
Esoteric G1X Master Clock
Master Clock Generator for speed improvement for the T1 turntable. significant improvement in music realism.
https://www.esoteric.jp/en/product/g1x/top
Durand --Tosca tonearm.
gimbal bearing design. Tosca is on the Esoteric T1 turntable
Primary Control 12" FCL tone arm
Field Coil Loaded uni-pivot tone arm. with power supply. mounted on the Esoteric T1 turntable. amazing natural and very high resolution tone arm. link below.
12 inch tonearm, stainless steel. used for the Sumile mono cartridge.
https://glanz.tech/e/collection/mh1200s1000s900s/
Experience Music/Intact Audio phono corrector + silver wound MC Trio SUT combo for three different tonearms.
bespoke tubed phono preamplifier. silver wound, with custom dual power supplies.
https://myemia.com/LR.html
LFD -3- Phono Cables DIN to RCA
3 sets of very high performance phono cables. amazing performance. built by Dr. Richard Bews in the UK.
one cable uses a DIN to RCA short Dongle + an RCA to RCA interconnect. the Dongle improves the performance of the DIN connection. details at the link below.
two Etsuro Golds, ---a pair of Reference MC Phono Cartridges.
duraluminim (A7075) body, 24 carat 'Kinpaku' Gold Leaf finish, diamond cantiliver. .3mv output, 4 ohms. these are both special versions of the Etsuro Gold.
one is mounted on the CS Port linear tracker.
one is mounted on the Primary Control FCL arm.
finest cartridge i have heard by a significant margin. WOW!
Audio Technica MC-2022 60th Anniversary cartridge
uses the unified stylus cantilever design. which results in extreme lack of distortion and linearity. remarkable neutrality and ability to dig out detail and keep it natural and musical.
https://www.audio-technica.com/en-us/at-mc2022
Murasakino Sumile Mono phono cartridge
MC cartridge for mono records, .04mv output. tracking force 3gms. finest monaural cartridge i have heard. competes on musical refinement with the top stereo cartridges.
Ampex twin ATR-102----one 1/4" and one 1/2" reel to reel master recorder
hot rodded by ATR Service Inc----Andrew Kosobutsky. significant upgrades over stock. each interfacing with hot rodded Ampex MR-70 preamps. the new tape deck performance standard in my opinion.
active isolation under 5 separate components: (1) the NVS turntable, (2) the MSB dac, (3) the darTZeel preamp, (4 + 5) both darTZeel mono block amplifiers. custom modifications by Taiko Audio add a linear power supply plus panzerholtz top layer + Daiza platform to provide full frequency resonance attenuation to each platform.
Taiko Audio Daiza isolation platform--22 used in the system
Panzerholtz Platform with spiral cutouts reducing mid and high frequency resonance while retaining life and energy and not changing tonality.
22 Daiza platforms in the system of various sizes under every piece of the signal path.
Evolution Acoustics 'system' power cables
a new version of the TRPC model i used on my darTZeel 468 mono blocks for the last 10 years. a big step up.
Sablon Audio King power cord
used on the Wadax Reference Server power supply.
https://www.sablonaudio.com/power
Absolute Fidelity power interfaces
power cords specifically designed for either motors (tt and tape decks), amplifiers, and components. 11 in the system.
Tripoint Audio Troy Signature
Grounding box for chassis grounding the darTZeel 458 mono block amplifiers + grounding the passive main towers of the Evolution Acoustics MM7 speaker system.
Tripoint Audio Elite
Tripoint Elite grounding box. this does chassis grounding for my sources. it uses a a pair of Tripoint Thor SE Master Reference ground cables for my dart preamp and the MSB Select II dac. there are also 4 Signature Silver ground cables to the two arm boards of the NVS tt, the power supply of the NVS tt, and the SGM server.
Equi=tech 10WQ
10kva balanced Isoltion transformer and distribution panel.
Furutech GTX-D NCF Rhodium duplex outlets
10 in the system. used with 10 Furutech covers and frames. uses NCF (nano crystal formula) material to reduce noise by emitting negative ions.
Wave Kinetics A10 U8 decoupling footers
8 sets-of-4 in the system for individual tuning of each piece of gear.
Auralex T-Fusor diffusers
i use 20 of these. 6 each on the front side walls, and 4 each front ceiling and rear ceiling.
Klaudio Record Cleaning System
automatic record cleaner
Acoustic Revive RL-30 mKIII CD-LP demagnatizer
for demaging any disc.
Furutech DF-2 LP disc flattner
will remove warps from Lps
Audiodharma Cable Cooker, Anniversary Ed.
will cook any cables
Winds ALM-01 Stylus Force Gauge
easy accurate, repeatable, measurments.
i-Tower by Koncept LED floor lamp
(3) are used. best audio light ever. 2 'warm', 1 'cool'.
Quietrock THX 545 drywall
specialized drywall with a 1/4" metal layer. used in my front sidewalls to establish proper room boundaries.
Mike, thanks for your input. Your answer to Conagie as to the types of music you prefer helped me too, as your listening preferences mirror my own. If you do bring in a big solid state amp I would be interested in what you hear and think.
I figured thats what they where for. I think especially on a wooden floor that the pucks would be really important. I was really interested in what type of material the "pucks" were made of.
Thanks again for sharing your experiences with those of us that are learning and haven't had the experience with or the oppotunity to demo the type equipment that you enjoy. I have really enjoyed reading your thread for the past couple of years.
One more question if you don't mind. I think I read that you wished the Dartzeel had just a little more power for the MM3's and were hoping that they might build mono's in the near future. If you were looking for an amp now would you consider the Halcro's or the Boulder amp for the additional power over the Dartzeel?
I've noticed from your pictures that you have one or more of what looks like some type of "puck" sitting on top of your Jena Labs Fundamental One power cords. Could you tell us what they are and what you feel the benefit you get from them are?
Just a thought on your Opus speaker cables, unless you have pulled the plug on your VR11's wouldn't you want both sets to connect to them for your setup?
I have never posted on your site before, but have really enjoyed following you through your experiences with your system and the changes you have made over the years. I hope you don't "pull the plug" on your postings. Some of us who enjoy reading your experiences with your system don't live in big markets to where we can hear or even see the type of equipment that you and other high end audiophiles use. Personally, I don't have the funds that allow me to purchase this type of equipment at this time, but I do dream to have a system like this someday and what I can read and get from people like you is a very valuable resource for those of us who aspire to reach where you have gotten and we can only thank you for sharing with us your experiences and insights into different pieces of equipment that you use.
I was lucky to be invited into a gentlemns home to hear the VR-7's with the DartZeel amp and meitner source equipment and was truly amazed. It just made me realize what can be truly attained with first class equipment. I would really appreciate if you would compare your new MM3's to your VR-9's when you feel you are ready.
