Description

Ease, coherency, large staged sphere-like presentation, virtually unlimited full-range dynamics and a relatively natural tonality are some of the core traits pursued and achieved with the fully actively driven pro cinema speakers, Electro-Voice TS9040D LX, and tapped horn subwoofers. 

"Full-range" with a proviso; to some what is full-range covers down to or even below 10Hz at full click, but in my use of the term I "merely" refer to honest 20-25Hz, which my corner-loaded pair of tapped horn subs will be able to achieve up to +125dB's - at the listening position. I never use their full SPL envelope even when being "liberal" with the volume control, but that's the whole point behind ample headroom: it translates into absolute effortlessness at any desired volume, while also making you more comfortable at higher SPL's (but be sure to project your hearing and avoid extended exposure to higher SPL's). 

Some may ask: why actively driven pro cinema main speakers and tapped horn subwoofers in a home environment? To put it shortly, because well-implemented - which goes for all speaker categories - they can sound great and absolutely effortless at that, and at a price level that calls for one to self-scrutinize when comparing them to "high-end" speakers/subs costing a downright fortune. 

So, what's the catch? Mainly it boils down to looks, size - and prejudice. Even price, but I'll get to that later. Aesthetics are very important to many audiophiles, more so than many will admit, and very large pro cinema speakers with their typically black Duratex surface and rugged industrial looks don't appeal to audiophiles with interior decoration demands, be they self-inflicted or by their spouse. Even if it doesn't concern interior design audiophiles often want or expect their speakers to have a particular "audiophile" look, which typically translates into a slender and deep enclosure with smaller, inefficient drive units. Finish-wise high gloss lacquer surfaces with (concealed) wood or other beneath it, are very popular. That's HiFi speaker looks in a nutshell. 

Size is another, huge factor. Audiophiles at large would rather pay dearly for smaller high-end category speakers than have much larger, cheaper and less "fancy" looking alternatives with pro or DIY origins in their homes. Because high-end speakers of limited size are refined, cultivated, voiced-by-ear and naturally adapted to home environments, whereas large pro cinema speakers and horn-based subs are brutes, coarse and only about playing hellishly loud - right? Wrong. What's mostly incorrect are the assumptions aimed at the latter, while the former severely lacks dynamics, presence, scale, fullness and effortlessness of reproduction - something the latter has in spades AS WELL AS resolution, coherency and refinement - not least actively driven. It's about letting physics have their say, properly implemented, and cutting loose prejudices and vanity. 

Which leads me to: price. Audiophiles have been more or less breastfed with the notion that you get what you pay for, but I find that in reality it only partially applies - relatively at that. All things being equal a bigger speaker will cost more than a smaller, which goes without saying; more material equates into higher price. However, the relative part comes into play when comparing a large high-end speaker with a large pro cinema speaker. Even when the former is smaller than the latter, the former will be outrageously more expensive, but will it actually sound better to justify its higher price? I don't acknowledge sound perception as such being subjective, it's rather about the aspects of what we hear that we prioritize (not least seen through the prism of what's brought up in the paragraphs above). With that in mind my answer to whether an über-expensive, large and lower efficiency high-end speaker sounds better than a much cheaper and even larger pro cinema speaker, is a resounding NO. With care taken implementing pro cinema speakers and not least driving them actively, they will serve up a sound that in core aspects obliterates most any lower eff. high-end speakers. Actively driven they will at least equal if not better resolution, while having a typically clearer, fuller and more uninhibited presentation. Some pro cinema speakers may roll off at 17-18kHz, but let those quarrel about that who can't find more important issues to raise. 

To conclude re: price, many audiophiles find that speakers (and audio products in general) can be too cheap for them to consider a purchase, because they've been told higher price means better sound - irrespective of anything, really. Starring at industrial looking large pro cinema speakers that cost much less than a smaller high-end speaker would lead to a clear case of cognitive dissonance if an audiophile's preconceptions were tempted by being told or found out by his or her own (unbiased) hearing that the former performs equally, if different, or even better. That's what it is. 
Read more...

Room Details

Dimensions: 18’ × 14’  Medium
Ceiling: 8’


Components Toggle details

    • Synology NAS
    NAS-server
    • Asus Xonar AE
    Digital optical output, 24-bit/192kHz. Used in a DIY Windows 10 Pro 64-bit music server. JRiver MC30 playback software. Fidelizer Pro.
    • Blue Cheese Audio Roquefort
    DAC/Digital preamp.
    • Xilica XP-3060
    Digital crossover, 3 inputs and 6 outputs
    • MC² Audio T2000
    2 x 625W/8 ohm class A/B fully differential balanced studio amp, horizontally bi-amped over the EV MF/HF horns.
    • MC² Audio T1500
    2 x 1025W/4 ohm class A/B fully differential balanced studio amp, horizontally bi-amped over the EV bass section.
    • MC² Audio T2000
    2 x 625W/8 ohm class A/B fully differential balanced studio amp, driving the tapped horn subs.
    • Electro-Voice TS9040D LX
    2-way pro cinema speakers, actively driven. Electro-Voice DH1A 2" exit and 3" titanium diaphragm large format compression driver and DL15W woofer/mid. The DH1A is loaded with the large format EV HP9040 Constant Directivity horn, and is used from ~600Hz on up. LR6 slopes throughout. 
    • MicroWrecker Tapped horn
    Tapped horn subwoofer x 2, ~23Hz tune with 15" B&C 15TBX100 driver. 20 cubic feet volume per cab. 97dB sensitivity. Covering 20 to ~85Hz. BW6 HP and LR6 LP.
    • Mundorf Silver/gold
    XLR Interconnects, with Neutrik connectors. Teflon insulated 24 AWG 99% silver/1% gold solid-core conductor, braided. Fed between BCA DAC/preamp output and Xilica DSP input.
    • Mogami 2549
    XLR interconnects, with Neutrik connectors. Fed between Xilica DSP and MC² Audio T1500/T2000 amps running EV horns and EV bass bins respectively.
    • Mundorf Silver/gold
    EV HP9040 horn + DH1A compression driver speaker cable. 19 AWG silver/gold conductor cable, solid-core, with teflon insulation. Balanced, highly resolved - excellent "monitor" cable.
    • Cordial CLS 425
    EV TL606DW bass cab and subwoofer cable with Speakon connectors. 4 x 13 AWG stranded copper cable.
    • Cordial CMK Road 250
    XLR interconnects, with Neutrik connectors. Fed between Xilica and MC² Audio T2000 amp for subs duties.

Comments 12

Showing all comments by islandmandan.

View all comments

You're not the only one that forgets about  posts. I finally saw your response this morning. Thank you for your comments regarding my system. I love my system, if I could, I would be in my listening chair all day everyday.

It's a very rewarding system to listen to, never tiring, and hard to leave. I listen late at night. I wake up in the morning many times and the system is still on, but that is the time when I can enjoy it intensely without disturbing anyone.
 I've just got to keep everything working, which over years in time takes some effort, and a fair amount of money. It's worth it, though.

best regards,
Dan 

islandmandan

Hello Phusis,

Man, you are one horny dude! I mean that in the best possible way! I think your horns would be a very good fit in my home, with my equipment. I'd enjoy hearing them..

Very nicely done, enjoy! Regards,
Dan

islandmandan