Description

It's almost 2 different systems sharing a preamp and speakers. I keep the video and audio stuff isolated from eachother completely so as not to compromise on the audio side. 2 dedicated circuits. 1 for audio, one for video. When building the surround setup, it was optimized for multichannel music - the benefit on film soundtracks is just a bonus. (plus, it's cool to tell your friends when watching the Lord of the Rings DVDs that the soundtracks were mastered and mixed using the same speakers) The sound is nothing short of fantastic. The Meitner combo, i feel is among the finest sources available, regardless of price. Those who remember my system before will notice that my Teres 265 table, SME V arm and VdH Colibri are gone. The reason? Because I firmly believe that with quality Redbook CDs, the Meitner combo equals the sound of the LPs. And on well-recorded SACDs, the sound surpasses the quality of my old TT rig. Those who haven't heard the Meitner combo - I highly recommend hearing it. There's *way* more information on those CDs than you ever thought there was! The dynamics are explosive and the transients and decays are so natural, you'd think you were listening to pristine vinyl - were it not for the absence of clicks and pops. The atc all active surround 5.1 setup (except for the linn active sub, which i don't use for 2-channel) along with the Meitner combo is nearly identical to what sony uses to demonstrate SACD, and that Telarc uses to master their recordings. They (the ATCs) are neutral, dynamic, accurate, transparent, clean, clear, coherent, and LOUD when necessary. For room tratments, I use Auralex diffusors, absorbers, and bass traps in the corners. Anyone looking for reasonably-priced room treatments shuld look. They are used in recording studios all over the place, and have a more industrial-type look to them. They're not ugly, but they're not as pretty as some of the more expensive room-control products. They are, however, extremely effective. For multichannel music, I use no bass management at all - all speakers are run full range, except for the Linn sub. The linn sub is crossed over internally at 40hz and is turned way down, only gently augmenting where the 50s start to roll-off. It mixes so well that sometimes I have to put my hand on it to make sure it's playing. :-) Anyhoo, that pretty well does it. Thanks for reading and lemme know whatcha think!
Read more...

Components Toggle details

    • EMM Labs CDSD
    gets clocked from DAC6 and upsanmples regular CD to double SACD sampling rate. easily better than the Philips.
    • Emmlabs Dac6
    6-Channel DSD/PCM dac. 2-channel CDDA converted to DSD before processing.
    • Emmlabs Switchman mk3
    6-channel, balanced analogue-only preamp. Receives multichannel inputs from the Dac6 (CD, DAD and SACD)and the Sunfire (DD, DTS)
    • ATC SCM 50asl - custom walnut finish
    3-way, fully active, 700 watts. more free of coloration than any full-range speaker i've ever heard. superb resolution and dynamics. also internally hardwired with DNM solid-core speaker cable.
    • ATC SCM 50asl (used for center)
    on loan from my brother. replaces an SCM-10 Active. having identical channels across the front is a HUGE deal.
    • ATC SCM-50 asl (pair for surrounds)
    finally have active 50s in the back as well! 5 identical full-range multichannel! hells yeah!
    • Denon DVD-1600 for DVD-A and DVD-V
    DVD player, no chroma bug, progressive scan, DVD-A.
    • Pioneer DVL-? Laserdisc
    Laserdisc player, DTS/AC-3 out
    • Nakamichi RF Demodulator
    For AC3 decoding from laserdisc
    • Panasonic PTAE-900U Projector
    Front digital projector, shining on a 96" screen. 720p HD.
    • Sunfire Theater Grand III (processing only)
    surround processor. only being used for video switching (dvd, cable, laserdisc, games, etc) and DD/DTS/DPL processing. No music sources pass through it.
    • Boston Acoustics - (for 7.1) VR-MX
    bipolar speakers for surround-rear effects. (dolby EX, dts ES) again, movies only.
    • RCA small 2-channel amp for surr back
    stricty for the surround-back speakers. (very few movies actually utilise this feature, so it's not necessary to have a high-quality amp here)
    • DNM Reson Solid Core Interconnects
    solid core, non-braided interconnects. fast, transparent, musical, inexpensive (in comparison, anyway) terminated with eichmann bullet plugs on rca terminations and neutrik xlr's where necessary
    • Mana Acoustics for the 2-channel stuff
    mana improves anything you put on it. it's the weirdest thing i've ever experienced.
    • Linn Sizmik
    Beautiful, accurate, incredibly versatile. not used in 2-channel.

Comments 53

Showing all comments by nreddy.

View all comments

Also considering the Velodyne DD18.

nreddy

Considering the Meridian front end viz G68/91 with my atc.Unsure between the Revel ultima and atc sub(C6).Have a pair of ATC 150 asl pro.Thoughts?

nreddy

Thanx Lazarus and vinush for your responses.I am thinking about emm front end(dac 6e/swtmn 2/cdsd)-I hear that the Meridian 861/trifield with the Reimyo cdp is much better.I also have a stage 2 vsei modded sony scd-1 that I can upgrade to stage 4 and use with the 861.At present I have a Levinson 380s pre.Any thoughts?

nreddy

Lazarus 28-did you find the Emm Lab front end better than other digital/preamp combos.Do you have the firewire?Is the Mana stands really that good?

nreddy

Vinush
Do you work with Tealarc?

nreddy

Laz 28-Why didnt you go for atc sub?

nreddy

Laz 28
Could you not integrate your multichannel audio and home theater into one system with your emm lab gear.BTW I have just received atc 150 asl pro and just love it.Thinking about surround with C4/C6 and asl 10/20's and emm lab gear viz dac 6e/swt man 3/cdsd-any thoughts or input.

nreddy

Thanx Laz 28-for response

nreddy

Hi-do you find multi channel more realistic than 2 channel?

nreddy