Upsample CD Player, Dual Mono, Class A discreat Output.

Two-channel digital/analog converter with remote control. Digital section: 5 digital inputs (3 S/PDIF RCA, 1 TosLink, 1 AES/EBU). Sampling rates: 32-96kHz. Analog input section: 1 stereo, RCA or XLR, (digitized at 24 bits/48kHz). Analog input impedance: 100k ohms. Analog frequency response: 20Hz-20kHz, ±0.5dB. Analog output section: XLR or RCA. Nominal output impedance: 50 ohms. Maximum output level: 775mV, 1.5V, 2V, 3.1V, 6.2V (selectable). Digital input frequency response: 10Hz-25kHz, ±0.5dB. THD: [lessthansign]0.02%. Crosstalk: [greaterthansign]105dB. Dimensions: 16¾

1 box cd player -

Wadia 861 - B - CD Player Transport: TEAC CMK-3.2 Vibration-free Rigid Disc-clamping System (VRDS) with Digital Servo Power Supply: Dual transformers in internal isolation chamber Decoding Software: DigiMaster 2.4 with Selectable Upsampling Algorithms 24 bit resolution DAC Sample Rate 1.4112 MHz Digital Volume Control Range: 50 dB in one-hundred ½ dB steps Maximum Output Voltage: Can be adjusted via internal switches from 0.3V to 4.25V to match system sensitivity Output Impedance: Less than 15 ohms Analog Outputs: 1 pr. balanced (XLR) 1 pr. unbalanced (RCA) Power Consumption: 25 watts Dimensions: Inches: 7 ¼ h 17 w 16 ½ d Centimeters: 18.4 h 43.2 w 42 d Finish Options: Black or Silver Anodized Aluminum Weight: 48 lb.. (21.82 kg)

Transport + Jitter + DAC + Power Supply

True Dual Mono configuration Infrared remote control Fully discrete circuitry Pure Class A operation Microprocessor-controlled menu functions Ultra-wide frequency bandwidth Zero negative feedback Select premium-grade components Microprocessor-controlled passive resistor volume control Custom-built C-core transformers 33,000 microFarad capacity per channel DC-coupling with servo-control Isolated power supply for non-audio circuits Extensive mechanical decoupling Ultra-short signal path with minimal internal wiring Non-magnetic, non-resonant aluminum cover Fully sealed, double-sided mil-spec PC boards with 75 µm copper traces PCB-mounted sockets eliminate wiring and shorten signal path Gold-plated input-isolating relays 4 balanced inputs and 2 balanced outputs with PCB-mounted gold-plated Swiss Neutrik XLR sockets 2 single-ended inputs and 1 single-ended output with gold-plated custom phono sockets Power line conditioning and voltage regulation Optional Gryphon Legato phonostage module Designed and built in Denmark

Fully balanced circuit 2 x 150 Watts Class A 40 High current bipolar output transistors 440,000 µF power capacitor bank Flat frequency response to beyond 350kHz Gryphon Guideline Reference gold-embedded silver internal wiring Zero global feedback Custom-built separate toroidal transformers Custom-built power capacitors Shielded, epoxy-damped transformer casings Separate power supply for display and control circuits DC servo coupling No output relays Frequency-independent damping factor Custom-built binding posts Automatic Green Class A bias setting or manual Low/High bias AC power status display AC polarity indicator Rigid mechanical structure Microprocessor-controlled non-invasive

Sensitivity (2.83 V/1 m): 86 dB Recommended Amp. Power: Medium size rooms: [greaterthansign] 120 Watts Large size rooms: [greaterthansign] 240 Watts IEC Long Term Power Handling: [greaterthansign] 250 Watts Impedance, Nominal: 4 ohms Impedance, (20-200 Hz): 4.6 - 9.2 ohms Impedance, (200-20 kHz): 5.0 - 7.7 ohms Impedance, Phase Shift (20-200 Hz): -19.6º - +18.7º Impedance, Phase Shift (200-20 kHz): -5.1º - +15.1º Impedance, HF (200 kHz): 5.4 ohms Frequency Response (+/- 3 dB): 43 Hz - 21 kHz Resonance Frequency: 43 Hz Internal Cabinet Volume: 20 + 22 liters Bass Principle: Bass reflex Weight: 90 lbs. each Dimensions (W x H x L): 8.2

www.xn360.com Technical specification: Mid-bass units: 2 x 182 mm Scan-Speak Revelator, stiffed hand-coated paper, low distortion

PERFORMANCE Frequency response 40Hz - 50kHz Maximum SPL (pair @ 1m) 112dB (anechoic) Typical max SPL (pair @ mix position) 118dB Distortion [lessthansign]0.5% DRIVE UNITS Driver type 200mm (8

Type: three-way, floorstanding, reflex-loaded loudspeaker. Drive Units: 20mm ferrofluid textile dome tweeter, custom made 120mm special treated midrange/bass unit 26mm voice coil, heavy copper rings above and below pole piece, solid copper phase plug, long throw 176mm treated paper woofer, 39mm voice coil Crossover: 180Hz, 5,500Hz (acoustical 3rd order) Frequency Response: 30Hz to 25kHz Phase Shift: +/- 15 degrees from 20Hz to 20kHz Sensitivity: 87 dB/W/m Nominal Impedance: 4 ohms Dimensions: 140 x 940 x 285 (WxHxD in mm) Weight: 17 kg Extra: WBT connectors, internal wiring and inductors are from 99,997% copper foil (alpha-core), polypropylene caps, Goertz MI1 internal wiring. Prices: Charisma $3,995 Chara $3,495

Silver Interconnects from Denmark - may be some of the best audio cables one can get ??

Single Wire Speaker Cable 3M

Made in Sweden. Great Value for money power cord. Modified with Acrolink connectors - Japan

2 Way Transmission Line Speaker. ATD Woofer & Alain Bernard 12015 Ribbon Tweeter.

Custom Speaker made in Germany. Tidal Audio.

30 mm Diamond Tweeter [T & P] Accutone
7

Transparent Audio
Power Link MM Power Cord.

Ces 2008 Launch 8/- K US $'s http://www.caryaudio.com/products/classic/CD306SACDPro.html Following the tremendous success of the 306 line of CD players, Cary Audio Design’s new CD 306 SACD Professional Version includes the latest in SACD, HDCD and CD playback technology. It features a new servo board design with internal components tested to 105° C. The PMD-200 filter has now been replaced with a high quality Burr Brown filter chipset. HDCD decoding is accomplished with the absolute latest software available. Larger, multiple power transformers along with higher current regulators add up to stronger, higher current regulated power supplies. This version continues on with 8 Burr Brown 1792u DAC chips running in a true balanced parallel, extremely low jitter digital to analog converter.

Meridian's new Referance CD Player. CES 2008 Launch.

1.5M Balanced Interconnect 1.5M Un-Balanced Interconnect

Upsampler
Digital to Digital Converter

Digital to Analogue Converter

RCA to RCA - 1.5M Xshadow Connectors
XLR to XLR - 1.5M Xshadow Connectors
BNC to BNC - 1.5M Oyaide Connectors [Digital Cable]

Clock

Echole Obsession Digital Interconnect (RCA) 2300 Usd / 3 feet
250 Usd each add. feet
Echole Obsession Digital Interconnect (XLR) 2600 Usd / 3 feet
250 Usd each add. feet
Echole Obsession Interconnect (RCA) 3800 Usd / 3 feet
300 Usd each add. feet
Echole Obsession Interconnect (XLR) 4300 Usd / 3 feet
300 Usd each add. feet
Echole Obsession Speaker Cable 6100 Usd / 6 feet
300 Usd each add. feet
Echole Obsession Power Cable 3500 Usd / 5 feet
300 Usd each add. feet

Interconnect Cable 2.0M RCA to RCA @ 7200/- Euro

2.5M Speaker Cable - Model 8 - Spade Terminated - Single Wire - 7350 Euro [retail].

Powered, servo-controlled subwoofer using

Top Line Power Cord - 1.5M Long. Euro Schuko Termination with 20Amps for Pure Power. May, 2010. 3376 Euro.

2.0M Euro Schuko terminated power cord - top line from Silencable - Germany. May 2010.

2.0M US Plug

DAC Made in Canada www.meitner.com

http://www.am-hiend.com/product/r-t1.html The preamp is a dual mono design, so that the transformers, power supply and voltage regulation are completely separated, so avoiding noise and cross talk. We use a large number of high value U-Cap copper foil capacitors, which were carefully chosen for their natural, analytical sound. The output transformers bandwidth can extend to between 15 HZ to 120KHZ