CD & SACD transport employing VMK-5 clamping system optimised for high speed disc rotation.

iLink cable with 6-4 pin configuration.

32bit dual mono DAC employing the AK4397 developed by AKM Semicon Inc.

The new flagship of the family. Plinth in acrylic. Weighing a total of about 38 kg, this turntable is a heavyweight. By omitting the lead shot chamber and joining two shell halves, a turntable of unadorned elegance came into being. Since no lead shot could be used to diminish resonance effects, other solutions needed to be found. This turntable also features three tone arm bases along with the electronically regulated DC motor with its fine speed adjustment and string drive, an 80-mm platter and height-adjustable steel feet in spike or flat format. “Das Laufwerk” No.2 is available in polished black acrylic and satin-finish colourless acrylic (glazed white). Armboards for various tone arms are available in acrylic, brass, aluminium or bronze.

Soundsmith-retipped ruby cantilever with line contact stylus. Currently mounted on Conductor arm at 1.68g VTF.

9 inch string suspended, magnetically damped, carbon fibre based tonearm, wired by Incognito.

Parallel air bearing tonearm. The Conductor uses a simple high flow low pressure aquarium based air pump system that negates the need for expensive stainless steel pressure fittings and fixings.

Dynavector's top of the line cart. The genius of Dr Tominari.

Used from the Conductor tonearm to the Herron phonostage. The D - 501 SILVER HYBRID is a special version of the D - 501 HYBRID with both stranded signal lines made of highest grade Matched Crystal Silver. This mat black HULLIFLEX ® 4 jacketed balanced cable was designed to support the tone-arm and mixing console industry: very flexible and with extremely good electrical qualities. The D - 501 SILVER HYBRID is a cable with a very high shielding factor. Sonically this is one of the best cables. The D - 501 SILVER HYBRID is regularly used as a microphone cable in critical professional recordings and as a special product for SME in England together with their prestigious tonearms which on customer request can be fit with this silver version of the D - 501 HYBRID. The 2 signal lines are made each of 19 x 0.1 mm. highest grade Matched Crystal Silver strands. The signal line insulation with the colours white and red is made of cell-PE, so the stripping can even be done with your fingernails to prevent damage of the silver strands commonly caused by mechanical stripping. The resistance per signal lead is: 11.9 Ohm/100 meter. The capacitance between the 2 signal leads is a very low 58 pF/meter. The hybrid shielding consists of a dense and very pure silver coated high grade Matched Crystal (MC) OFC 72 x 0.1 mm. wire helix with underneath a Linear Structured Carbon ® (LSC) saturated conductive sub-jacket. The resistance of the shielding is: 3.2 Ohm/100 meter.

Specifications Playback frequency range: 15 - 50,000Hz Output voltage: 0.5mV (1kHz and 5cm/sec. Channel separation: 30dB (1kHz) Output balance: 0.5dB (1kHz) Stylus pressure: 1.8g (stock: 1.6 - 2.0g) Coil impedance: 17 Ohms (1kHz) Direct current resistance: 17 Ohms Load resistance: 20 Ohms or more Coil inductance: 70 mu H (1kHz) Static compliance: 40×±0 - 6 cm/dyne Dynamic compliance : 10×±0 - 6 cm/dyne (100Hz) Needle tip form: Soundsmith Line Contact (Stock: Micro linear) Vertical tracking angle: 23deg External size: L26.5 × W 16.6 × H16mm Mass (cartridge): 6.8g

Turntable mat made of polyurethane fibre(record side), kevlar, and carbon fibre base(platter side).

MC phono stage with 66db gain. Tubed with Tesla ECC803s(gold pins) x4 and RCA 12AT7. Placed on Feet of Silence footers.

Heavyfeet solid brass footers placed under the Herron phono and the Audio Magic Eclipse PLC.

MD 90T is the successor to the FT101A. The MD 90T continues the tradition by re-defining state-of-the-art in analog FM tuner design. The MD-90T combines the very latest in discrete, analog technology. In addition to its highly renowned MOSFET front end, which provides 3 stages of very careful and precise RF amplification, it has added the Triode audio section, which includes a NOS Tesla gold pin ECC88 tube in the amplification stage. Upgraded with Kimber silver wires.

Under Magnum Dynalab MD-90T.

Interconnects from Esoteric D5 and Herron VTPH1mc: employs 2 ultra-pure silver flat ribbon conductors. Bullet plugs. Air dielectrics. Cryo treated with MST treatment. Welcome to the high-end cable! The Sorcerer 4D is very detailed and dynamic! Fantastic soundstaging... it is smooth, transparent, and very musical.

Tube rolled the following: Amperex 7119 replace 5687 Westinghouse(RCA) 6CG7 replace 6N1P Mullard GZ30 replace Sovtek GZ34

High mass solid brass footers with pointed tips placed on MDF.

Used between the Dynalab tuner and preamp. Employs 2 pure silver ribbon conductors. Silver shield. Lockable connectors. Teflon air dielectrics. Cryo treated with MST treatment. These cables are detailed, very smooth, quiet and dynamic. They offer great staging, musicality.

Used between pre and power amps. -- Two large ultra-pure silver conductors. -- Silver bullet plugs. -- Air dielectrics. -- Cryo treated with ultra MST treatment.

Technical Details
This amplifier will deliver more than 2000 volt-amps per channel into an ESL, and when driving magnetic speakers, the ESL amplifier will deliver over 360 watts/channel into an 8 ohm load, and over 600 watts/channel into a 4 ohm load. Momentary output into a 2 ohm load exceeds 1000 watts.

Specifications
Power - 360 watts RMS per channel into an 8 ohm load
Gain - 26dB
Bandwidth - DC through 100kHz
Slew Rate - 50 Volts/microsecond
Input Impedance - 50kohm (both balanced and unbalanced)
Noise - More than 110dB below rated output
Output impedance - Less than .04 ohm, 20 Hz - 20 KHz
THD + Noise - Less than .08%, 20 Hz - 20 KHz
17

Massive 1 1/2" ultra-pure silver conductors. Screw-on bananas. Air dielectrics. Cryo treated with ultra MST treatment. Super-dynamic, detailed, transparent and musical!

Copper with silver coating.

Triaxial satellites which redefine what is possible with dynamic speakers. These literally disappear and leave the music in its wake. Wonderful tonal accuracy and fast response, without any smearing of notes.

12" woofer powered by 250w built in amp, finished in santos. Integrates well with the Baltics, fast and tight bass response.

5' silver, silver/copper power cords to preamp/DAC/Phono(Illusion), poweramp/subwoofer (Sorcerer), CD TPT/tuner (Powerdrive).

Fitted with Filter Matching, the Eclipse II has 3 totally isolated circuits, two detachable silver power cords, two 20 amp breakers, 10 ga. silver conductors, cryo treated with MST treatment, specially designed duplex's (with surge and spike protection), two super filters, premium teflon caps, as well as premium and ultra premium parts.

Cut and varnished 2 pieces of 1

THE Professional Record Cleaner.

Placed on ModWright SWLP9.0 has helped to reduce tube microphonics.