Description

Feel free to comment on this. In the meantime, these are what I have. Currently researching analog/vinyl phase.
Read more...

Components Toggle details

    • Teres Audio Teres 255 in Rosewood
    Unbelievable table!
    • Garrard 301 Oil Bearing
    Idler Wheel Drive TT
    • Thorens TD-124 mkII
    TD 124 MKII with 60 lbs layered birch ply plinth.
    • Thorens TD-124
    Cream Idler Drive
    • SUT's Altec, Cinemag, Tribute
    SUT's
    • JEL Full Function preamp JEL
    6SL7 phono, 76 + 6SN7 linestage
    • SUPRATEK Chenin
    Linestage Preamp with Phono
    • Homebrew 2A3/45 Amp
    Home-built with james 6115 HS OPTs and tube PD's at 9.3 and 9.5 Watts.
    • Home Brew JE Labs 2A3 SE DX
    76/6sn7 driving 2A3
    • Dynaco Stereo 70
    Curcio Mods Driver Board and Cap Module
    • Super Tono 300B
    300B 8wpc amp
    • ICE-H2O S-250 Signature
    PWM Amp
    • Threshold Stasis S250 Series II
    250wpc A/AB
    • Hagerman Trumpet
    Single Ended, dual mono using 4x12AX7's and 4X12AU7's.
    • Wright Sound WPP100C + WS04
    Phono Preamp with Power Supply
    • Linkwitz Lab Orion
    3 way active crossover, multi channel amp
    • Linkwitz Lab Active Crossover
    3way
    • Magnepan 1.6QR
    Quasi ribbon
    • Mye Sound Mye Stand
    Mye Stand for the 1.6QR
    • DIY Full Range Fostex 167E MLTL
    Full range 94 dB sensitivity in a Mass Loaded Transmission Line (MLTL) design.
    • Martin Logan Ascent
    Light Oak Trim
    • Bozak Audio Lab Rhapsody mkII
    3 way Infinite Baffle
    • Thomas Schick 12 Inch
    Heavy Tonearm designed for Denon 103 and SPU G
    • Origin Live OL Silver MKII
    OL modified Silver Arm MKII
    • Koetsu Koetsu Rosewood Sugano
    0.6 mV
    • Denon 103R SoundSmith Retip
    Ruby Cantilever LCS
    • Shelter 901
    Fine Precision MC cartridge. 0.5mV output, conical stylus, 14 Ohm internal impedance
    • Denon 103R
    0.28 mV Output Moving Coil
    • Denon DL-304
    MC
    • Benz Micro ACE (M)
    Medium Output (0.8mV.)
    • Jolida JD-100
    with remote, 22 lbs Modified Version by Parts Connexion
    • Mapletree Audio Design Octal 6A Triplex Tube Preamp
    Highly modified Octal base(12J5GT, 12SN7GT,& 6R7G) tube preamp running on, passive, Cathode Follower(CF) and Shunt Regulated Push-Pull(SRPP) modes.
    • Odyssey Audio Stratos mono
    180w x 1, monoblocks, 56 lbs, 360000 uF caps
    • Threshold S-500 sII
    250 W/Ch Class A/AB Optical Bias
    • Yamaha RXV1
    Receiver
    • Paradigm Studio 40
    Front, Studio CC Center
    • Sony CDP-CX333es
    300 disc
    • Velodyne SPL-1000
    powered, 10in woof for HT only
    • Acoustic Zen Satori
    2.5 meters OFC 10 Ga. all spades
    • Nordost Blue Heaven Rev II
    Silver Plated Copper
    • Aural Thrills / Asylum DIY Copper Big One / Bob Crump Design
    10 ga pure copper / 14 ga Belden
    • 47 Labs OTA Interconnects with Eichmanns
    Solid Core copper
    • Groneberg Quattro Reference and TS Premium
    Copper
    • Vibra Killers / Isolators
    Vibra Pods, LAT Int. Vibra Killers, Herbies Audio Lab Little feet, Sorbogel Little Feet, DIY diffusers
    • Kimber Hero
    Copper 1.5 M use for HT only
    • Monster HT3500
    For TV and Receiver Only
    • M&K LCR-55
    pair, 5.25 in woofer
    • VD Power 2's, Power 3's
    Cryo treated, 14 Ga., 12Ga
    • orion orion
    orion
    • orion1 orion1
    orion1
    • orion2 orion2
    orion2
    • Denon 103R
    MC
    • Shelter Shelter 501
    MC cart
    • Magnepan MG-1.6qr
    planar
    • Altec Lansing Altec 604-8G in Altec 612 Cabs
    Full range, 100 dB Sensitivity, 22 Hz. to 20 Khz
    • Altec Lansing Altec 604-8G
    Open Baffle
    • Altec Lansing 604
    604-8G in OB's

Comments 48

Nice system on Audiogon
I don't know if you'restill using the Mapletree audio Octal 6B. I'm considering it, as well of the Ee Minimax Preamp, and just wanted you opinion. especally compared to the other preamps you have.

Thanks

launche

Owner
Audiofankj,

Thank you very much sir! I value your comment highly.

Yes, my S-250 Signature is special to me. It is better than the original S-250 in my system.

Thanks again!

amandarae

Wow, nice system! I don't know how I missed this one... great TT, great preamp, I have an idea how your amp sounds :) and have owned the Martin Logan SL3's which don't hold a candle to the Ascents... This must be a very sonically satisfying system. Keep us posted how it sounds.

audiofankj

Owner
Teres, MG1.6QR, ICE H2O, Supratek, and Jolida sir!

amandarae

WoW!!!, I can see that you have more than one audio system or at least you can build more than one system, which one is your today main system?.

Regards and enjoy the music.
Raul.

rauliruegas

hi,i like the set up of you're system,for you which speakers do you like most magnepan 1.6 or martin logan ascent thanks.

enjoy listening
ron

simplicitymusic

Owner
Bemopti123,

The speaker can go down to 36-37 Hz. in my room listening at 10 feet away from the center.

Goodluck!

amandarae

How much bass, I am sorry.

bemopti123

How much are you getting from the Brines speaker?

bemopti123

Owner
System edited: Added an MLTL design Brines Fostex base 167E speakers.

amandarae

Owner
You are welcome sir!

amandarae

Another convert! I guess you ended up liking the supratek better. Thanks for the info.

tutordennis

It's rare that someone compares two components I'm actually interested in--I'd love to hear your continuing impressions.

tutordennis

Owner
Tutordennis,

Yes, I believe so. It is too soon to tell since I only have the Supratek for about a week. But, I compared them (the Wright going to one of the inputs, and of course the Chenin is direct)and so far, all I can say is that they have different presentation especially in the bass region and midrange.
The Supratek has all the stock tubes while I am using Telefunkens and Mullards on the Wright during the comparison. Now that I have pretty good tubes on the Chenin, I will try to compare them again if I can force myself to stop playing LP's for a while!

amandarae

How do you compare the Supratek's phono stage to the Wright? Is it too soon to tell?

tutordennis

Owner
System edited: Added a Supratek Chenin Preamp. Worth the wait and then some! Very Happy with the results!

amandarae

Owner
Slipknot1,

Thanks for the compliments. Yes, sir! I built the rack. You will see that my limited carpentry experience is evident from the finish product. But, it suit my purpose and my significant other have no complaint as far as how it looks so I am happy with the outcome.

BTW, saw your post regarding the Supratek Chenin preamp. Like you, I ordered one and still in the waiting game. I should get mine this month. Don't worry about the wait. Just find some things to do and shoot Mick(Maloney) an e-mail after two months or so to get updates. I have no doubt that we will be rewarded in the end.

...cheers...

amandarae

Owner
Tutordennis,

IMHO, I think the Wright compliments the Teres's character very well. It is a very quiet phono pre plus any changes on the tables set up (VTA,VTF, anti skate etc.)can easily be evaluated through the preamp as well as changes in the preamp tubes itself. Since the Teres works substantially well with MC cartridges (at least on mine), the phono's gain is more than sufficient for it to be use even without an ancilliary step up transformer unless of course we are talking about 0.1-0.2 mv output from the cart.

Another one is that the tubes use in the Wright are not that expensive unless exotic 12AU7's are preferred. At the price point of the Wright preamp, it is very difficult to find one comparable in performance that uses tubes IMO. For me, there are only two preamps(phono) that can be comparable to the Wright as far as price/performance is concern. The EAR 834P(which I heard in my system) which I believe is inferior sounding to the Wright, and the Hagerman Cornet. The Cornet? Well I'll let you decide if it is better than the Wright.

Of course, I can only answer your question base on my experience in my system. A friend who has the Wright and will let you borrow it will answer many more of your concerns if it is possible to do so. Try it, you might like it!

...cheers...

amandarae

Wow! I don't know how I missed this. Very nice. Did you build the rack? Beautiful selection of components. That TT looks spectacular.

slipknot1

Very few systems on the 'Gon actually make me jealous--what a system! I've been searching all over the net for a negative comment on ANY Teres table, and I've yet to find one! I noticed that several people have used the Wright Phono stage with Teres tables. Why do you think that is?

tutordennis

Owner
System edited: Finally, I posted some system/component pics. Cheers...... Abe

amandarae

Interesting system. Very diversified and I'm sure very musical. I'm curious how you like the Aural Thrills interconnects. For a $60.00 interconnect, how do they sound or compare to other name brands?

sherod

Owner
System edited: New and improved!

amandarae

Showing 26 - 48 of 48 posts