I have wanted elctrostats for over 10 years and now I have got them! Power Cables are Belden E83754 StarQuad red with a switchable spiral ground with Watt Gate and Marinco plugs SPECS: descended from Statement E2 Descended from Statement E2, Prodigy establishes new standards in technology, performance, and aesthetics. Advances in our electrostatic transducer, a new multi-transformer design, and isolated high-pass/low-pass crossover result in increased efficiency, power handling, and bandwidth extension. Multi-laminate composite cabinetry integrates a matrix assembly for strength. Aluminum alloy head-piece and side plate, and extruded stator supports increase rigidity of the ESL frame assembly resulting in an utterly non-resonant high performance cabinet-providing luminous detail, and expanded dynamics. Innovative, ForceForward™ (patent pending) bass configuration utilizes dual aluminum and high rigidity fiber cone drivers in isolated chamber configuration. You experience unprecedented room/bass control with outstanding placement flexibility-clean, pure, powerful bass-everywhere. Prodigy sets the standards for living with sound. Available in matte black with a variety of hand-finished hardwood trim options, Prodigy is both single wire and bi-wire stereo capable. EISA (European Imaging and Sound Association) High End Loudspeaker of the year, 2000-2001 Frequency Response: 28–22,000 Hz ± 3dB Dispersion Horizontal: 30 degrees Vertical: 4' (122cm) line source Sensitivity: 91 dB/2.83 volts/meter Impedance: 4 ohms, 1.0 at 20kHz Crossover Frequency: 250 Hz Components: Custom wound audio transformers, polypropylene capacitors, air core coils Woofer type: 10” (25.4cm) x 2 (per channel) cast basket, high excursion, high rigidity cone with extended throw driver assembly, non-resonant chamber format. Bass Control Switch: +3dB below 50Hz Power handling: 300 watts per channel Weight: 133 lbs/each (60kg) Dimensions: 67” H x 16.5” W x 28” D (170 x 42 x 71cm) ForceForward: the problem bass reflections... the solution ForceForward As long as recorded music has been enjoyed in the home, loudspeaker designers have faced the challenge of room interactions produced by bass frequencies which can color and alter the character of the music. These colorations are a natural occurrence of sound wave reflection and motion through any listening room. Remember that all speakers radiate bass frequencies in all directions—including behind the speaker. The low frequencies which are reflected from the front wall and back to the listening position, add to or subtract from the original audio material and chaotically interact throughout the listening environment. Typically, this produces a diminished signal—called a null—at about 50Hz and an enhanced signal—a peak—at around 100Hz.

Very good center-Power Cables are Belden E83754 StarQuad red with a switchable spiral ground with Watt Gate and Marinco plugs SPECS: the reference electrostatic center channel From the beginning, the center channel has been recognized as the most critical element in any home theater and multi-channel music system. It grabs your attention, grounds the cinematic experience, and holds you in the moment. Designed and executed precisely, the center channel bridges the main channels and provides a seamless sound stage that tracks the cinematic environment—to perfection. This is exactly what MartinLogan Theater i was designed and manufactured to do—effortlessly. Theater i builds upon the foundation of the hugely successful Theater center channel loudspeaker by incorporating a myriad of design innovations including a Generation 2 stat panel featuring ClearSpar™ technology, MicroPerf stator, low-voltage DC power, and enhanced cabinet and stator finishes. The Theater i’s new Generation 2 stat panel incorporates a reformulation of our conductive coating and a new plasma deposition process. This refined thin film technology provides improved impedance tolerance and maximum adhesion and abrasion resistance. ClearSpar technology enhances Theater i’s transparent look and increases both efficiency and dynamics. The new MicroPerf design reduces the size of individual holes in the stator, allowing more openings compared to a traditional MartinLogan ESL transducer, maximizing efficiency of the Theater i’s small ESL transducer. Fusing this ultra high-performance Generation 2 CLS™ transducer with dual proprietary 6.5” shielded dynamic bass drivers and an innovative controlled dispersion array has resulted in a design capable of fully resolving any sound from the subtlest dialog to room-shaking effects. Theater i’s innovative controlled dispersion array minimizes destructive high-frequency room interaction. To eliminate the need for a traditional IEC power cord and significantly increase ease of installation, especially for custom applications, the Theater i features a low-voltage DC power supply. To further enhance custom application options, the Theater i ships with a multi-mount stand attached. Whether the Theater i is placed atop a rear projection TV, wall mounted under a plasma screen, or placed on the floor, the unit can be precisely aimed simply by adjusting the proprietary MartinLogan handgrips. Enhanced cabinet and stator finishes, standard on the Theater i, include the attractive and durable new semi-gloss black cabinet finish and shimmering, dark gray Meteor colored stators (the front and back perforated electrostatic panel elements). The Theater i is supplied with single-wire, high-resolution, proprietary toolless binding posts for effortless cable attachment and management. Frequency Response: 70–22,000 Hz ± 3 dB Dispersion: 30 degrees Sensitivity: 90 dB/2.83 volts/meter Impedance: 4 ohms, 3.1 @ 20 Hz Crossover Frequencies: 300, 3000 Hz Bass Drivers: Two 6.5” (16.5 cm) magnetically shielded. Non-resonant asymmetrical chamber format CLS™ Mid-range: Patented CLS™ electrostatic transducer High Frequency Drivers: Three 1" (2.5cm) soft dome, controlled dispersions array Power Handling: 250 watts/channel Weight: 57 lbs (26kg) Dimensions With mounting bracket: 13" H x 43" W x 11.5" D (33 x 109.2 x 29.2cm) Without mounting bracket: 10.5" H x 43" W x 11.5" D (26.7 x 109.2 x 29.2cm)

Great surrounds! -Shorten cables and added Marinco plugs SPECS: Design a pure, flexible surround speaker that perfectly matches with our floor standing models" ...that's exactly what we've done— marrying the performance of the Script with the lifestyle and video friendly look and styling of the popular new Clarity loudspeaker—and more. This versatile wall mount speaker excels as a stereo main, rear and side surround or in a multimedia configuration and can be driven to perfection by most AV receivers. The world's most accurate transducer—the patented MartinLogan CLS™ (curvilinear line source) ESL—has advanced to a new level and been blended seamlessly in this dramatically updated hybrid. The Script i’s new Generation 2 stat panel incorporates a reformulation of MartinLogan’s conductive coating and a new plasma deposition process. This refined thin film technology provides improved impedance tolerance and maximum adhesion and abrasion resistance. The new MicroPerf design reduces the size of individual holes in the stator, allowing more openings compared to a traditional MartinLogan ESL transducer, maximizing efficiency of the Script i’s small ESL transducer. ClearSpar™ technology enhances Script i’s transparent look and increases both efficiency and dynamics. The discretely sized Script i also features a state-of-the-art poly-cone woofer optimized for bass reflex design that delivers an accurate low-end response. To eliminate the need for a traditional IEC power cord and significantly increase ease of installation, especially for custom applications, the Script i features a low-voltage DC power supply. To further enhance custom applications, the Script i is only 7 inches deep when mounted on its pivoting wall-bracket (included with the Script i). Enhanced cabinet and stator finishes, standard on the Script i, include the attractive and durable new semi-gloss black cabinet finish and new shimmering, dark gray Meteor colored stators (the front and back perforated steel electrostatic panel elements). The Script i is available with three rail trim colors (silver, white bronze and black) and features single-wire, high-resolution binding posts for effortless cable attachment and management. Frequency Response: 70–20,000 Hz ± 3 dB Dispersion Horizontal: 30 degrees Vertical: 26" (94cm) line source Sensitivity: 89 dB/2.83 volts/meter Impedance: 6 ohms, 3 at 20kHz Crossover Frequency: 450 Hz Components: Minimal straight path design, air core coils Woofer type: 6.5" (16.5cm) mineral filled poly-cone with high damping rubber surround; non-resonance asymmetrical chamber format; bass reflex Power Handling: 150 watts/channel Weight: 25 lbs /each (11.4kg) Dimensions: 43.9" H x 10.2" W x 6.8" D (111.5 x 25.9 x 17.3cm)

C 2 Features:
Dolby Digital EX, DTS ES, and Dolby Pro Logic II surround
THX Ultra2 Certified with THX Surround EX
7.5 Channel Enhanced Surround; 7.1 with 4 programmable outputs
Additional DSP modes include Surround Music and Party
Patented hybrid bass management prevents time smearing
Automatic digital audio and video input selection
Nine balanced outputs, two balanced inputs with XLR connectors
Four audio only inputs plus a tape monitor/external processor loop
Eight digital inputs; two digital outputs
7.1 analog input with pure analog path, bypasses DSP
Six audio/video inputs with composite and S-Video connectors
3 composite video and 3 S-Video outputs: OSD, no OSD, record
2 assignable component/RGB video inputs with separate H and V Sync
1 component/RGB video output with separate H and V Sync
BNC to RCA adapters are included for component video jacks
Component inputs/output pass 1080i and 720p signals flawlessly
Digital inputs and surround modes are assignable to sources
Presets for optimum and analog input levels for various sources
100% automatic calibration of channel levels and delay times
Calibration microphone with 25’ cable included
Dual zone control with analog audio and composite video outputs
External IR input jacks for main and second zone
Three 12v triggers, two programmable for events; wires included
Fully upgradeable and controllable via two-way RS-232 port
3u chassis, rack mountable
Award winning customized MX-700 and Sidekick remotes included
Parasound’s 10 years parts, 5 years labor warranty

C 2 Specs:
Frequency response: digital inputs 20 Hz - 42 kHz;
analog inputs 20 Hz - 22 kHz;
7.1 channel input 5 Hz - 200 kHz +0/-3 dB

Total harmonic distortion: digital inputs [lessthansign].002%;
analog inputs [lessthansign].002%;
7.1 channel input [lessthansign].002%

Signal to noise ratio: digital inputs 102 dB;
analog inputs 98 dB;
7.1 channel input 107 dB

Maximum input levels: balanced 35 V rms;
unbalanced 3.6 V rms;
7.1 channel input 8 V rms

Maximum output levels: balanced 16 V rms;
7.1 channel outputs 8 V rms;
programmable outputs 8 V rms

Video bandwidth: composite and S-video (non OSD) 30 MHz;
component video 300 MHz

Dimensions: 17-1/4
-Shorten cables and added Marinco plugs

The Model BP-3 Ultra features our 7.5-amp LoNo transformer from the BP-1 and our 2.5-amp LoNo transformers in one package. This unit is ideal for the front-end of larger systems or complete smaller systems with amps of up to 100wpc. Digital equipment can be completely isolated from the other components by plugging into the smaller transformer. There are 10 outlets total, usually wired with 4 on the smaller and 6 on the larger transformer, but custom factory wiring is available to accommodate your specific system needs [just give us a call]. Includes C-12 power cord. This unit is unique in having the smaller transformer piggy-backed to the larger transformer, giving you twice the isolation and power line filtering for your digital components. The benefits are an even lower noise floor with incredibly solid imaging and low-level detail.

Introducing a line of digital projectors designed for the cinematic connoisseur: the Mitsubishi HC3000U DLP™ projector with BrilliantColor™ technology from Texas Instruments.

It delivers everything you would expect from a Mitsubishi home theater projector - long lamp life, low fan noise, and portability - but it's also setting new standards with innovative technology. The Mitsubishi HC3000U DLP™ projector, unlike other digital projectors, is able to produce a dramatic 4000:1 contrast ratio that accentuates deeper and darker tones to create an overall stunning visual experience with vivid images and brilliant colors.

At the heart of the HC3000U is Texas Instruments’ state-of-the-art TI DarkChip2™ with the DDP3020 chip featuring BrilliantColor™. BrilliantColor™ is a new, cutting-edge technology that enables higher brightness, by boosting the midtone color levels, while providing truer, more vibrant colors for realistic and lifelike images. Be it sports, movies or television, the HC3000U can turn your home theater room into a virtual stadium, cinema, or studio.

As soon as you switch it on, you’ll see it. And then you’ll understand. This is a product of tomorrow that brings home real entertainment today.

I have had these two amps for 13 years! They are known for being a classic. Soon to be put out to pasture for some tubes! -Shorten cables and added Marinco plugs

Active subwoofer with specially developed 8

This hospital grade plug is perfect for the replacement or building your own audiophile grade power cords. Meets or exceeds hospital grade (green dot) UL tests. Perma-Lock™ Terminals actually

Side Surround speakers and other two channles are bridge momo for the center speaker-Shorten cables and added Marinco plugs The GFA 2535 is really two GFA-535s in one, with the flexibility to drive three or four channels. With individual level controls for precise control of each amp's volume, it's the ideal foundation for an authentic, ultra-realistic surround sound theater system, or for a multi-room or multi-speaker audio system. A single switch on the GFA-2535's rear panel lets you select 4-channel operation, or bridge two of the channels for a 3-channel configuration. In the 3-channel mode, the GFA-2535 brings your home theater to life, delivering 200 watts of clean, distortion-free sound to the center channel, and 60 watts to each of the rear channels. Add it to your existing 2-channel amplifier and you'll be at the center of a superbly balanced, awesomely powered stage with sound so real you can practically touch it. For audio applications, the GFA-2535 in the 4-channel mode acts as a pair of 60 watts-per-channel amplifiers to drive two sets of speakers. With two of the channels bridged, it delivers 60 watts each to a pair of satellites, and 200 watts to a single subwoofer for an incredible display of musical strength so real you definitely can feel it. Three channels or four, home theater or home audio, the award-winning Adcom GFA-2535 gives you twice the versatility of ordinary amplifiers. And twice the value that has made Adcom famous.

Blanaced StarQuad 11 AWG stranded (7x22) tinned copper conductors, FEP insulation, conductors cabled, 100% Beldfoil® shield with 85% tinned copper braid shield, FEP jacket.

The 320 IEC connector is perfect for the replacement or building your own grade power cords. Heavy-duty vinyl connector body is available in black or clear. Perma-Lock™ Terminals actually

This is for the rear surround speakers-Shorten cables and added Marinco plugs GFA-5200 SPECIFICATIONS Number of channels 2 Watts per channel into 8 ohms 50 Watts per channel into 4 ohms 80 Number of output devices 4 Type of outputs MOSFET Power transformer Toroid Storage capacitance 27,000uF Input Sensitivity for 1 watt output 0.1 volts Input Sensitivity for full output .71 volts Damping factor 20Hz - 20kHz >260 Rise Time 5kHz, 20%-80% 1.1us Dynamic headroom into 4 ohms 2.2dB IM Distortion (SMPTE) l watt to full power into 8 ohms.....<0.07% 1 watt to full power into 4 ohms.....<0.07% IM Distortion (CCIF, Any Combination from 4kHz to 20kHz) full power into 8 ohms....<0.035% full power into 4 ohms.....<0.035% THD + Noise at full power into 8 ohms (Typical) 20Hz.....0.018% 1 kHz.....0.020% 10 kHz.....0.070% 20 kHz.....0.140% THD + Noise at full power into 4 ohms (Typical) 20 Hz.....0.018% 1khz.....0.020% 10 kHz.....0.080% 20 kHz......0.165% Frequency Response at 1 watt into 8 ohms (10Hz to 20kHz).....+0, -0.25dB Power Bandwidth (-3dB).....3Hz to 130kHz Gain.....29dB Input Impedance.....49.9K ohms Signal to Noise Ratio, "A" Weighted (full power into 8 ohms) .....> 98dB Power Consumption (Continuous, Both Channels Driven) Quiescent.....50VA Maximum.....600VA Full power 8 ohms.....325VA Full power 4 ohms.....480VA General Chassis Dimensions....3" x 17" x 11.375" Maximum Dimensions.....3.25" x 17" x 12.125" Weight.....17 lbs. Weight Packed.....22 lbs. Power (Available in 230VAC by special order).....115VAC - 50/60Hz

This is more of a power strip now-Shorten cables and added Marinco plugs

-Shorten cables and added Marinco plugs

This will be upgraded drastically! Any suggestions?

HDMI™technology/SA-CD Single Disc DVD PlayerDVP-NS90V Enhanced Sony® technology for your entertainment lifestyle. 720p/1080i Upscaling Video Output through HDMI™1 Connection DVD-RW/DVD-R/DVD+RW/DVD+R/DVD/DVD+R DL Playback2 12 Bit Video DAC with 108Mhz Processing SA-CD Playback Superior technology from a single disc DVD player. Sony's DVP-NS90V single disc DVD player packs three impressive technologies that enhance your movie and music experience. Sony's Precision Drive™ 3 System feature corrects warped disc's response for fewer image errors by adjusting the lens rather than the entire optical block for more accurate source playback. Other features such as the Precision Cinema Progressive™ Technology detect image changes at the pixel level instead of at the scan line level like most traditional DVD players do. By measuring algorithms, the DVP-NS90V adjusts for pixel behavior resulting in sharp backgrounds with moving objects that are virtually free from motion artifacts. The DVP-NS90V also offers MP3 Playback3 ,when using MP3 encoded discs, so you can select the perfect music folder to round out your day. • Precision Drive™ 3 System Past generations were only able to compensate for warped discs by moving the entire optical block, which took more time and limited the amount of correction possible. Sony's new Precision Drive™ 3 system simplifies the process by moving the lens-instead of the entire optical block-for faster and more accurate error correction. • Precision Cinema Progressive™ Technology Other DVD players detect image changes at the scan line level-Sony's Precision Cinema Progressive (PCP) system detects them at the pixel level. The picture is more faithful to the source-whether film or video-because separate, optimized algorithms are used to handle the differing pixel behavior. Separate algorithms are also used to process the moving and still parts of an image, resulting in sharp backgrounds with moving objects that are virtually free from motion artifacts. • MP3 Playback3 Playing MP3 Music on aSony® DVD player is easy. Just insert an MP3 encoded disc and press MENU. A blue screen pops up to display your folders. Scroll down the list using the remote or front panel cursor control to select the folder you want. The green files screen pops up to show the files in the selected folder. Select the file you want to hear and you're done. Finding music couldn't be easier. • 720p/1080i Upscaling of Video and delivery through HDMI™1 Connection • DVD-RW (Video Mode/VR mode w/CPRM) DVD-R/DVD+RW/DVD+R Playback2 • 12 Bit Video DAC with 108Mhz processing • SA-CD Playback • MP3 Playback3 (CD-R.RW, DVD-R/-RW/+R/+RW) • JPEG (CD-R/RW, DVD+RW/+R/-R/-RW, Kodak) 4 • CD (CD/CD-R/CD-RW)/VCR/SVCD5 • A/V Sync Allows for the alignment of the audio track to match the video - Necessary for some newer televisions that have video buffers or delays. • 192 kHz 24 Bit Digital to Analog Converter • Dolby® Digital and dts® through Coaxial and 5.1 Analog • Quick Set-Up • Custom Parental Control- 40 Discs • Remote Control with Limited TV Control Compatible with many but not all Major Brands • Child Lock (Tray Lock) • DVD/CD Text • Multi-Disc Resume- 6 Discs • TV Virtual Surround - 5 Surround Modes • Custom Picture Mode • Title and Chapter Viewer • Advanced SmoothScan™ and SmoothSlow modes • Instant Replay and Instant Search • Full 3-2 Reverse Conversion • Fast Play with Audio • Slow Play with Audio • Video Equalizer • Background Graphics • Variable Coefficient Filter • FL Off gives you the ability to turn off the front display. • Separate Speaker Settings

Bi-Wire speaker cables-The Grey snake!

TECH-SPECS™

Heavy-duty 24k gold contacts for high conductivity connections
Double shielded construction for maximum rejection of EMI and RFI
N2 injected dielectric insulation for ultra-low signal loss
Ultra-pure 6N (99.9998%) OFHC copper center conductors for accurate signal transfer
Available in 0.5, 1, 1.5, 2 and 4 meter lengths

XLR Cables that run to my mains:

Our finest audio interconnect cable represents a new benchmark in design and sonic performance.
Dual balanced audio interconnect cable with Time-Aligned™ multiple-gauge 6N OFHC copper conductors
Two-conductor twisted-pair configuration with proprietary winding geometry comprised of three precisely wound wire networks with a single large conductor for deep bass; six intermediate sized conductors for the critical mid-range and ultra-fine strands to transfer the delicate high frequencies for the ultimate in musical balance.
Ultra-low capacitance micro-porous Teflon® insulation for faster signal transfer
Double shielded with full aluminum mylar foil coverage and 95% braid 6N OFHC copper shield grounded at source end.
Terminated with precision-machined; high-performance balanced XLR connectors.
Attractive TechFlex® braiding protects cable jacket from damage.

DRN – XMO 1MK2 XM Radio receiver

100

Select the on-screen message or issue that you need assistance with
Go to the receiver's remote home page
Use interactive receiver menus
Research information on additional equipment
Learn How To's
View installation information
Find additional receiver features and information

Receiver Features
EPG Functions

Channel Surfing Enhancements Explain

Customers can select to skip

RCA cables-Custom - Ultralink Audiophile MK II

MVS: S-Video

TECH-SPECS™

Heavy-duty 24k gold contacts for high conductivity connections
Double shielded construction for maximum rejection of EMI and RFI
N2 injected dielectric insulation for ultra-low signal loss
Ultra-pure 6N (99.9998%) OFHC copper center conductors for accurate signal transfer
Available in 1, 2, 4, 6 and 10meter piece

Ultralink is one of today's fastest growing brands of high performance audio and video cable and connection products in the North American market and ... international scene. PRODUCT FEATURES: Heavy-duty injection-molded connectors with Ultralink proprietary gold-plated contacts to ensure low-loss, non-corrosive, high conductivity connections; Ultra-low capacitance nitrogen-injected dielectric insulation for maximum signal transfer in high-speed, full-bandwidth digital multimedia connections.

Cable lifters

S-video/RCA converter CCS-1M

Infrared repeater –
For connecting four emitters and power supply to Jamo IR receivers

Adapts to three conductor wire

Requires PS-1 power supply

Got to keep the old school stuff just incase someone breaks out a VCR tape!

KEVLAR 4 SERIES 6.5 K4 6 1/2