Office System

by stereo5 on Opinions Please

Description

This is a solid state based office system that I have been constantly upgrading.  I spend over 80 percent of my time in my home office where this system resides.  The system is set up for casual listening and thus, the speaker placement.
Read more...

Room Details

Dimensions: 60’ × 45’  X large
Ceiling: 18’

Components Toggle details

    • McIntosh MA6600 200wpc Integrated Amplifier
    A 200wpc Integrated amp with the autotransformers and large blue meters.  The quality and fit and finish of this integrated has to be seen and felt.  I got here late to the McIntosh party but I am very glad I did.
    • JBL Synthesis L 100 Classic Loudspeakers
    JBL L100 Classic speakers with 12 in woofer and orange grills
    • SVS 2000 Pro PB Subwoofer
    A 12 inch ported subwoofer to compliment the JBL L100 Classic Speakers
    • Schiit Audio Lokius EQ
    a 6 band graphic EQ. This is what happens when you start suffering hearing loss
    • Sony HAP-Z1ES HDD Audio Player
    A hard drive based audio player with an excellent dac and audio section.
    • McIntosh MCD 301 CD/SACD Player
    Another beautiful McIntosh piece with 24/192 dac and a smoothness that needs to be heard
    • McIntosh MR 85 AM-FM Tuner
    High quality FM tuner with presets.  It sounds very analog like.
    • Canare Cable Canare 4S11 Speaker Cable
    Fantastic sounding speaker cables, bested my $1000.00 cables for $106.00
    • Groneberg Quatrro Reference Interconnects
    Used between Music server & Amp.
    • Blue Jeans Cable LC-1
    3 pairs of LC-1 cables.  Two pairs 1 meter cables for the Bellari EQ and one 5 meter pair for the SVS Subwoofer.
    • AudioQuest King Cobra Balanced Interconnect
    A 1 meter balanced pair of interconnects to connect the McIntosh SACD Player to the Integrated amp.
    • Shunyata Diamondback Platinum Power Cord
    Diamondback Platinum Power Cord. A worthwhile upgrade over stock cord on the Integrated amp.
    • Audio Art Cable PC-1 1 meter Power Cord with Furutech ends.
    11 gauge Power Cord for the power hungry McIntosh Integrated
    • Furutech Power Cord
    14 gauge 1 meter power cord from wall out to power conditioner
    • Furutech E-TP80 PLC Power Line Conditioner
    Audiophile Power conditioner
    • Solid Steel S2-5 Audio Rack
    Four shelf audio rack in black.
    • Magnum Dynalab ST-2 FM Antenna
    FM Antenna
    • DIY-Furutech Custom Power Cord

    1 Power Cord for SVS 2000 Pro PB Subwoofer

    1-33 foot 12 gauge power cord with Furutech F-11M Copper AC Plug & Furutech F1-11 Copper IEC Plug.  From wall outlet to SVS 2000 Pro PB Subwoofer


Comments 22

Showing all comments by stereo5.

View all comments

Sign in to comment
Owner
Replaced Golden Ear Triton One Speakers with a pair of JBL L100 Classic speakers and a SVS 2000 Pro Subwoofer.  I just felt like tryinmg something different after 6 years.

stereo5

Owner

Update 11-06-17

Replaced Parasound Halo integrated with a McIntosh MA6600 integrated amp.  Replaced Cambridge Audio CXC Transport with a McIntosh MCD301 SACD Player, Replaced Magnum Dynalab MD90 Tuner  and MD205 Signal Sleuth with a McIntosh MR85 Tuner.  Replaced Golden Ear Triton Two speakers with Golden Ear Triton 1 Speakers.  Also replaced a few cables.

stereo5

Owner
Major Update:  Replaced Rogue Cronus Magnum Integrated with a Parasound Halo Integrated amp.  This was a good move for the system.  Replaced my broken Sony SCD777ES SACD player with a Cambridge Audio CXC CD Transport.  I am pleasantly surprised by the good build quality of the Cambridge transport.  Lastly, I added a Wireworld Starlight 6 Coax digital cable to go from the Cambridge CXC to the Parasound Halo's built in DAC.

stereo5

Owner
Update: 1-8-16  Added a Furutech E-TP60 Power Distributor  for the GE Triton 2 Speakers.  Also made a DIY Power Cord with Furutech Male AC Plug and Furutech Female IEC Plug.

stereo5

Owner
Speaker Update:  Replaced Odyssey Kismet speakers with Golden Ear Triton Two towers on 12-23-15

stereo5

Owner
System edited: Sent the Tekton Pendragons back to manufacturer. Too big for the room. Put Odyssey Kismet Reference Floorstanding Speakers back into the system, sans the granite bases. Also re-tubed the Cronus Magnum with 470.00 worth of new tubes, some NOS. Quite satisfied now

stereo5

Owner
System edited: Replaced Odyssey Kismet Reference Speakers with the more efficient Texton Pendragon speakers.

stereo5

Owner
System edited: Made a few updates: Added a Sony HAP-Z1ES HDD Audio Player, Pangea 4 shelf audio rack and Shunyata Venom3S power cord for source components

stereo5

Owner
System edited: Replaced power distribution block with a Furutech E-TP80 PLC. This conditioner is non power limiting.

stereo5

Owner
System edited: Replaced Magnum Dynalab FT-101A Tuner with a Magnum Dynalab MD-90. Added a Pangea AC-9 MKII 7 gauge power cord from wall outlet to power distribution block. Used leftover Pangea Ac-14MKII on MD-90 Tuner

stereo5

Owner
System edited: Replaced PAC IDOS power strip with a GAOFEI Power Distributor and added another Pangea AC14SE MKII 1 meter power cord from power distributor to the wall outlet. Wall outlet upgraded to a Shunyata outlet.

stereo5

Owner
System edited: Updated all pictures and added new ones.

stereo5

Owner
The Shunyata power cord is attached to the Rogue Integrated amp. The Tuner has a fixed power cord, so it is stock. The Magnum Dynalab Signal Sleuth uses a Pangea power cord only because I had a couple of them hanging around. No difference in sound , but a big difference for the better on the Sony SACD player.

stereo5

Owner
System edited: Updated pictures.

stereo5

Owner
System edited: Added a Pangea AC14SE MKII Power Cord for the Sony SACD player.

stereo5

Owner
System edited: Added a Magnum Dynalab MD-205 Signal Sleuth to use in conjunction with the Magnum Dynalab FT-101A tuner. Replaced Kimber Silver Streak cable with a Groneberg Quattro Reference Cable. Replaced the MIT AVT-3 cables with a pair of Audio Art SC-5 speaker cables. The sound seems more fluid now.

stereo5

Owner
System edited: UPDATE: Removed JJ12au7 tube in preamp section of Rogue Integrated and replaced it with a NOS Mullard CV4003 12au7 tube. It added just the right amount of richness. Replaced Terk powered antenna with a Magnum Dynalab ST-2 FM antenna. Big improvement.

stereo5

  • 13K
  • 22
  •  0
© 2024 Audiogon.com