Description

The system is at a point where I don't mess with it much as I can listen for hours without fatigue. It is geared towards Rock & Roll as that is mainly what I listen to. The Digital Front End sounds amazing with actual CD's or Streaming through the Lens. The recent addition of the Rega RP-1 has been a cheap way to enjoy a lot of 180Gram Vinyl.

Cheers,

-Chris
Read more...

Components Toggle details

    • Electrocompaniet EMC-1 UP
    The new EMC 1 UP, launched in 2001, improves on this already excellent design by introducing 24-bit/192kHz upsampling technology. Vital to the EMC 1 UP’s performance is a unique cancellation system which effectively cancels acoustic / mechanical vibrations, enabling exceptionally accurate and robust laser pick-up from the spinning disc.
    • Electrocompaniet EMC-1 Spider Clamp
    Nice upgrade for the EMC-1 UP.
    • Electrocompaniet ECD-1
    Introduced in 2002, the ECD 1 is based on the digital-to-analog section of the EMC 1 UP and features the same 24Bit/192KHz upsampling DAC.
    • Rega RP-1
    Entry Level Turntable which sounds fantastic through the Unico SE MM Phono Stage.
    • Apple MacBook Pro
    Connects to the Squeezebox and a 1.0 TB External Hard Drive which houses my Music Library.
    • AudioEngine B1 Bluetooth Streamer
    Bluetooth Receiver-Digital Out
    • Genesis Digital Lens
    Using with AudioEngine B-1 and AudioQuest Vodka Toslink and HT Digital Platinum SPDIF to the ECD-1 DAC with Great Success.
    • Unison Research SE Integrated Amplifier
    Hybrid Integrated Amplifier born from the UNICO amplifier. With it we want achieve the goal of improve the nominal out-put power arriving to 130 W on 8 ohm, and improve the extension in frequency. For achieve that we have double out-put (now we have 4 MOS-FET per channel), we have increase the capability of the filter and more power on driver stages. This can permitted double the capability of current out-put, of the amplifier, so it can easily work at lower loud impedance value. In the same time we improve the realibility, thanks to more distribution of power consumption. Another improvement is the placement of the power capacitors and MOS-FET they are at minimum distance. The drivers stages were modified, we using in it a transistors circuits instead of single transistors, this improve the frequency response, the speed and linear of driver. We use the same driver used for the UNICO 200, where the problem of pilot the power MOS-FET are more. The in-put stage is the same of the UNICO, used the double triode and a stage of communication voltage-current with bipolar transistor.
    • Mullard CV4003 Vintage NOS Tubes
    Installed on the Unico Se and really take the amp to the next level.
    • Magnepan MG-1C
    Picked a pair of these up new old stock on Ebay for dirt cheap. Remarkably musical in my somewhat small listening room. Have moved the Grand Pianos to my 4K Video setup. Really enjoying them.
    • Sonus Faber Grand Piano
    Type: 30 litre two-way with ABR front vented design, magnetically shielded Tweeter: 26mm silk dome ferrofluid cooled Mid and Bass Driver: 180mm fibre glass multi-coated cone Frequency Response: 35Hz - 20kHz Sensitivity: 90dB/2.83V at 1 meter Nominal Impedance: 6 ohms Crossover Frequencies: 200Hz, 3kHz Maximal Power Handling: 250 watts Dimensions: 1080mm x 235mm x 290mm (HxWxD) Weight: 25kg each Cabinet Finishes: Baffle, top and rear, sides solid walnut or black piano lacquer. Accessories: Tripod spiked platforms (supplied). Price: $3,500/pr.
    • XLO Signature 2 Series
    Signature2 is the successor line to the Signature Series, which, for almost a full decade (from 1992 to 2001), upheld XLO's reputation as
    • XLO Signature 2 Series
    Signature2 is the successor line to the Signature Series, which, for almost a full decade (from 1992 to 2001), upheld XLO's reputation as
    • Shunyata Research Black Mamba
    Used on the EMC-1UP
    • Shunyata Research Black Mamba
    Used on the ECD-1 DAC
    • Shunyata Research Black Mamba
    Power Cord on Unico SE Integrated
    • Harmonic Technology Digital Platinum
    Harmonic Technology's Digital Platinum digital cable offers the widest bandwidth and frequency range for the most accurate and smoothest transition from any digital source. It is considered a
    • AudioQuest Vodka
    Tousling used to connect AudioEngine B1 to Genesis Digital Lens.
    • Porter Ports 20 Amp Hubbell Outlets
    Non Plated, Cryo'd 20 Amp Hubbell Outlet.
    • Target B5
    Welded 5 Shelf Component Stand.
    • SVS SB-1000
    Sealed Enclosure Subwoofer.

Comments 28

Showing all comments by the_kid.

View all comments

Owner
System edited: Updated addition of Rega RP-1.

the_kid

Owner
Hi Pat! Sorry for the delayed response, I just saw your post. Yea, I have not had much time to listen over the past 6 months as I have been traveling quite a bit for work. Listening has been via my iPhone through my Jawbone Jambox or Headphones on the road.(I know, pathetic isn't it?)

Lately I been listening to the Drive By Truckers, Social Distortion, Foo Fighters, Jason Isbell, Mumford & Sons etc, and been revisiting a lot of 70's, 80's, and 90's material that I have just lost track of.

How about you? Any good purchases lately?

I hope all is well!

-Chris

the_kid

Owner
System edited: Added an additional Shunyata Black Mamba to the system used on my ECD-1 DAC. Love these cords on digital.

the_kid

Owner
Thank you Bberns22!

Cheers..

the_kid

Owner
Doron,

Thanks for the post and sharing your experience. Hmm. I have not really experienced that scenario in my setup. I have also owned the Concertino and Concerto Homes (which have the same tweeter) with no issues and I listen at a decent level as I mainly listen to Rock N Roll.

My Speakers are Toed-In Slightly but I have a feeling this works for me as my listening room is an odd shape. I had them positioned straight on and they did sound great. However, a buddy of mine and I played around one Saturday with the placement and things just clicked by toeing them in slightly. The image is focused and the soundstage is large in this position. They also like the spikes to be slightly on the loose side.

As you will notice in the pictures; each speaker resides on a large slab of Travertine which really works well for the sound. Anyway, thanks for visiting and good luck with your system!

Cheers,

-Chris

the_kid

Owner
Daveyf,

I could not agree more! I definitely love the sound of strings on my setup and Sonus Faber Speakers in general.

Cheers,

-Chris

the_kid

Owner
Thanks for the compliment. I found the rug at IKEA a few years back.

Cheers,

-Chris

the_kid

Owner
System edited: Updated Pictures

the_kid

Owner
Rob, I liked the Taipan and the richness it added to my system. However, after living with it for a while and listening to a large variety of music. It was almost too much of a good thing. Certain recordings lost their "Magic" and "Air" that the XLO delivers so well.

Also, the bass was just slightly bloated on certain recordings. The XLO has a more transparent and accurate reproduction on my system. I am still going to continue to audition power cords but for right now, the XLO stays. All of these observations were on my EMC-1 UP CD Player with the Spider Clamp. I did not test it on my ECD-1 DAC.

Although they are essentially the same DAC Card. Hope this helps!

Cheers,

-Chris

the_kid

Owner
System edited: Added Airport Express back into the mix.

the_kid

Owner
System edited: Back to the XLO Reference Power Cords on my Digital Front End..

the_kid

Owner
Added a Shunyata Taipan Helix VX to the EMC-1UP CD Player which replaced the XLO Reference Power Cord as an upgrade. I have given it a few days of play time and the Shunyata Cord has made a nice difference in the sound and texture of my system. More thoughts and impressions to come..

(This cord has me thinking about how much better a Python or Anaconda VX might sound. Maybe move the Taipan VX to my DAC for my Squeezebox)

It never ends..

-Chris

the_kid

Owner
-UPDATE-Installed Porter Port Hubbell Outlets

Okay, so yesterday I upgraded my Single Outlet to a Duplex Outlet by installing two of Albert's Porter Port Outlets. I had always had my amp plugged into the wall prior but was using a WireWorld Power Strip with an XLO Reference Power Cord to feed my sources. ( I know, not the best connection)

What I first noticed on just plugging my cords in was the grip that these outlets have. The plugs are engaged firmly and definitely not going anywhere. My old outlet was no where near this grippy. Well, I powered up my system and let it play for about 3 hours to warm up and came back to take a listen.

There was definitely a difference but I had a hard time at first putting my finger on it. Then I realized that things seemed blacker and the noise floor was absolutely more quiet than before. Also, the treble was still detailed but a little bit sweeter than before. Not rolled off but sweeter. The bass also seemed a little tighter and tuneful with great extension.

Anyway, knowing my system well and it how it sounds; adding these into the mix is an absolutely upgrade and a fairly inexpensive one at that. From what I have read, the outlets need some burn time and will change slightly in character over the course of week or two so I will continue to listen. However, even if they don't change, I am very satisfied with the results so far.

-Chris

the_kid

Owner
Thank you Milpai! The Sonus match very well with the SE integrated and love the power it produces. The combination is definitely warm but with a perfect amount of detail and precision. You can listen for hours on end without fatigue.

And yes, the EMC-1UP is probably my favorite component. It is definitely the most musical CD player I have had the pleasure of owning and enjoying.

Thanks so much for the compliments!

Cheers,

-Chris

the_kid

Owner
In the process of installing a Quad Outlet with 2 20AMP Porter Port-Hubbell Outlets which will eliminate the Wireworld Power Strip with an XLO Cord Feeding it which my sources have been plugged into. Will also be putting a higher end Shunyata VX power cable on the CD Player and probably Shunyata Alpha on the Unico. Will update everyone on the results...

-Chris

the_kid

Owner
Hi Jim !

Yes, I really was a fan of the Au24 for a long time and still think it is a great performer. What made me switch to XLO was I had fantastic results in a past system using the XLO Type 5 (Green & Purple) Speaker Wire with their Original Reference Interconnects. After thinking about it, it was probably one of the better sounding systems I had ever assembled.

So that got me thinking and I took a leap of faith and ordered up the Signature 2 Speaker Wires and Interconnects to A-B with the Audience. After break in and some serious time with the XLO, it really just out shines the Au24 combo in my system.

I think what I noticed immediately was a much more vivid placement of the instruments, a much deeper soundstage, and tighter more defined bass with better extension. There is also an airiness to the treble which the Au24 just never had.

Anyway if you ever get a chance, definitely audition them.

Cheers,

-Chris

the_kid

Owner
Thank you Dave! Yes, the SE drives the Grand Pianos with ease. It also seems to match them tonally. Good luck on your speaker purchase and thanks for visiting!

-Chris

the_kid