Laminated hard rock maple inner rim, Phillipine mahogany outer rim ~ Radiating laminated mahogany beams ~ Octagrip 11 ply hard rock maple pinblock ~ Solid sitka spruce soundboard ~ 10 Ribs ~ Vertically laminated maple and mahogany capped bridges with cantilevered bass ~ Agraffe duplex construction ~ Mapes bass strings ~ 20.9lb hammers ~ V-pro cast iron ~ Maple parts ~ Spruce keys ~ Spruce and hardwood keybed and frame ~ Solid brass hardware ~ Slow close fallboard
Upsampling Network DAC without Headphone Amplifier
Dimensions:
444mm / 17.5” x 430mm / 17.0” x 115mm / 4.6“
Weight:
16.7kg / 36.8lbs
Converter Type:
dCS proprietary Ring DAC™ topology
Digital Inputs:
Ethernet network port on RJ45 connector, accepts 24-bit 44.1 – 384kS/s PCM, DSD/64 & DSD128 in DFF/DSF format; USB 2.0 interface on B-type connector, accepts 24-bit 44.1 – 384kS/s PCM, DSD/64 & DSD128 in DoP format; USB On-The-Go interface on A-type connector, accepts 24-bit 44.1 – 384kS/s PCM, DSD/64 & DSD128 in DFF/DSF format; 2 x AES/EBU inputs on 3-pin female XLR connectors, accepts 24-bit 44.1 – 192kS/s PCM, DSD/64 & DSD/128 in DoP format; 1 x Dual AES pair, accepts 24-bit 88.2 – 384kS/s PCM, DSD/64 & DSD/128 in DoP format; 1 x SPDIF on RCA Phono connector, accepts 24-bit 44.1 – 192kS/s PCM & DSD/64 in DoP format; 1 x SPDIF on BNC connector, accepts 24-bit 44.1 – 192kS/s PCM & DSD/64 in DoP format; 1 x SPDIF optical on TOSLINK connector, accepts 24-bit 44.1 – 96kS/s PCM
Analogue Outputs:
1 x pair balanced outputs on 2 x XLR connectors. Output levels: 0.2V, 0.6V, 2V, 6V rms for a full-scale input, set in the menu. Output impedance: 3Ω. Maximum load: 600Ω (10k-100kΩ is recommended); 1 x pair unbalanced outputs on 2 x RCA connectors. Output levels: 0.2V, 0.6V, 2V, 6V rms for a full-scale input, set in the menu. Output impedance: 52Ω. Maximum load: 600Ω (10k-100kΩ is recommended)
Wordclock I/O:
2 x Word Clock Inputs on 2 x BNC connectors, accept standard Word Clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz. The data rate can be the same as the clock rate or an exact multiple of the clock rate. Sensitive to TTL levels. 1 x Word Clock Output on 1x BNC connector. With Sync Mode set to Master, a TTL-compatible Word Clock is output
MQA:
Full decoding and rendering of MQA data from the Network and USB2 inputs. Final rendering of unfolded MQA data only from the other inputs
PCM mode: up to 6 filters give different trade-offs between the Nyquist image rejection and the phase response. DSD mode: 4 filters progressively reduce out-of-audio band noise level, plus Filter 5 which has an improved transient response
Conversions:
User selectable PCM upsampling to DXD, DSD or DSDx2
Software Updates:
Download and update functionality available via dCS Mosaic Control app
Local Control:
dCS Mosaic Control app for unit configuration and playback. RS232 interface (controlled by a 3rd party automation system). dCS Universal Remote is available as an optional extra
Power Supply:
Factory set to either 100, 115/120, 220 or 230/240V AC 50/60Hz
Power Consumption:
30 Watts typical / 50 Watts maximum
Power Conditioner
Model:
Shunyata Denali 6000S V2
Input/Output Voltage:
Max Input: ~125VAC
Output: ~90-125VAC (unregulated)
Current Ratings:
Max current: 20 Amps (continuous)
Peak instantaneous current: >100 Amps @ 8.33ms
Over-Current Protection:
Hydraulic electromagnetic breaker
Transient Suppression:
NextGEN TMOV Transient Protection
40,000 Amps @ 8/50μs
Sockets/Connectors:
AC Inlet: IEC C19R (aka 20A)
AC Outlet: 6x NEMA 5-20R (3-pin US outlets, 20A capable)
Ground lug: Single
Noise Suppression:
Input to Output: > 50 dB reduction (100 kHz – 30 MHz)
Zone to Zone: > 60 dB reduction (100 kHz – 30 MHz)
@roc_doc thanks for your comment. The amp itself doesn't run too hot, but I would not use tubes so close. The window is probably worse for keeping the piano in tune but I don't really notice
