Industrial grade AC outlet, firmly grips plugs.  Feed by dedicated 10 gauge supply line from panel on it’s own 20A breaker.

Amazing nano particle coated copper 12 gauge power cable. Used from wall outlet to Arcam receiver.  Furutech FI-11-N1 (G) IEC and FI-11M-N1 (G) AC connectors. Have tried using with Furutech FP-S35TC TripleC/Rhodium Connector PC.  I may modify the Nanotec cable with better connectors.

Clearly a step up from the Wiremold power strip it replaced.  Everything is much, much better after long breakin period.

Plug-in power conditioner. Significantly reduced hum in analog system. Provides blacker backgrounds across the board in system.

This is a great high purity copper 12 gauge cable with Cryo’d Copper/Rhodium connectors. Extremely revealing cable without being analytical.  Alternates duty on Teddy Pardo Linear Power Supply feeding Chord DAC and Node to Shunyata Venom power strip and Arcam AVR.

This is a dual output 5V, 3A power supply that supplies both my Bluesound Node and my Chord Qutest.  It has transformed the sound of both devices for the better.  Very well made, and came with decent DC cables for each application.

Bluesound Node is a remarkable source.  Interface is very good, and sound quality is exceptional for all file formats served from SSD hard and flash drives (but avoid conventional USB hard drives as sound is mediocre to horrible). Streams pretty much any service you choose. The internal DAC in the Node is competent, but less accomplished than the file serving and streaming functions. Combined with the Chord Qutest DAC it’s the best sounding digital source I have had in my system so far. Overall hifi bargain. Teddy Pardo power supply takes it to a whole other level.

This coax cable is a critical part of my digital front end.  Digs details and timing out of the Bluesound Node and Chord Qutest that are astonishing.  Much, much cleaner bass, but makes everything better.  Worth the investment.

Very good sounding silver plated USB cable. For when I want to connect my laptop to the Qutest, which is pretty much never.

Best DAC I’ve owned yet.  Can’t stop listening.  Teddy Pardo power supply makes it even more awesome.  Running Qutest at 3V output because I like the sound I get with the default setting versus 2V or 1V settings.

Very neutral and reasonably priced IC.  With Furutech rhodium RCAs from Qutest DAC to Arcam AVR.  Also using a set of these cables on my ProJect phono pre.

Consumer product that works as surprisingly good transport for redbook set to output "raw bitstream" data.  Very good Bluray sound and video performance too.  TG for economies of scale in manufacturing and distribution!

Best sounding optical cable of the four I have tried, including from Chord, Audioquest, other glass cable and something recommended by Steve Nugent, the designer of Empirical Audio Overdrive DACs.  And it’s not really close.  Connects Samsung BD-H6500 to Qutest DAC.

HDMI cable with excellent sound and video performance.  Samsung BD-H6500 to Arcam receiver.  Noticeable improvement over other cables I’ve tried.

2” Air-Dried Maple Vibration Control Board with low triplepoint brass feet and isoblocks used with Thorens TD-150 mkII.  Increased treble and midrange clarity with more subtle detail, tighter bass, longer decays and better timing for more toe tapping.  OMG!

Using tonar perspex mat, Mapleshade vibration kit and Ortofon LW 7N headshell leads.  All adds up to enhanced spatial definition, transients and bass.  Shocking presence and jump factor from this old table.

Good match for Thorens TP13A arm.  Fast, detailed, flat frequency response, good bass and tracking at 33 or 45rpms plus Nagaoka midrange magic.  This cartridge is crazy good - best I’ve had in my system to date.

This is the upgraded 18V linear power supply for the Pro-Ject Tube Box DS. Ridiculously large improvement over stock switching mode power supply. Quieter, more organic, layered and natural sounding with much better bass. Cleaned up sound of whole system including digital, presumably by eliminating Pro-Ject SMPS.

Coherent and natural sounding phono pre. Excellent with Swagman SE linear power supply, captures subtlty and nuance in midrange along with deep bass and shimmering highs.  Good match with Nagaoka MP-500 cartridge.  Rolled pair of Gold Lion ECC83 in for stock tubes.  Wow!  Touch, dynamics, tonal balance and sound stage all improved.  Using with Audio Selections small metal cones on small bamboo board.  Will stick with this pre for a while.  Thanks running pre at 50db jumper for higher output.  Zero tube or transformer noise through speakers up to 89db volume on Arcam.  More dynamics with Nagaoka cartridge at this setting than at 40db.

Silver coated mil spec OCC copper wire, Teflon dialectric, with silver plated copper connectors. This is a great cable!  Transparent, fast and neutral RCA cable.  Used occasionally in analog front end in place of Nanotec #207 RCAs, which is an excellent affordable RCA.

Best sounding AV receiver I could find for 2-channel listening under three grand.  Improvements elsewhere in system reinforcing how good and transparent to source this unit really is.  Two channel analog stereo mode with all digital circuits shut down is wonderful.  Good Blurays sound awesome in 5.1.

Silver plated OFC alpha processed stranded copper power cables with rhodium connectors. Huge improvement in video clarity. Well defined and nuanced audio.  Surprised that this cable makes difference with Fire Box, but it does.  Connects Swagman lps serving Fire Box and B&W subwoofer to Shunyata power strip.

Digital subwoofer. Fast and deep. Operates equally well on both line level and hi level inputs, but low, low bass capability requires careful cartridge/arm match or subsonic filter.

Wall-mounted 2.5 way MTM speakers, times 3. Singing in this set up overall - especially male and female voices.  Improvements in sources and cabling have revealed capabilities I failed to appreciate initially.

40 foot runs.  Used for rear speakers. Neutral.

2 way wall-mounted speakers (rear) times 2. Very nice little speakers.

Replaces wall wart for Amazon Fire TV Cube.  Overkill?  Keep switching supplies out of my system. Period.

Remarkably good sound and and video performance from this little “smart” device.

Reasonably priced HDMI cable.  Closest I have tried to Audioquest Vodka which costs significantly more than this.  Picture is nearly identical, sound is very close, a bit warmer than the Audioquest.  Connects Amazon Fire TV Cube to Arcam receiver.

Decent Samsung OLED TV. Picture detailed but not as inviting or as fast as my old Panasonic plasma which quit working and no parts available. 4K source material does look pretty awesome though.

Blanket is used to cover 65” TV when listening to music.  It is not the thickest wool blanket I have tried, but it sounds the best. Center fill locks in, instrument placement improves both laterally and vertically, and there is much less glare in treble at volume.  The blanket is bigger than the monitor so I drape it longways over the top and roll the overhang on each edge and stuff the rolls behind the TV to flatten the front face and to block sound from getting behind it.  I do not recommend lightweight fleece blankets as that did not improve sound nearly as much.