THIS BK AMP POWERS THE TOPS or SATALITE PORTION OF MY SPEAKER SYSTEM
Adcom and Hafler Upgraded preamps
2 PREAMPS 2 SEPERATE SYSTEMS ON ONE RACK you should see what a hodge podge of wiring is behind this monster
Adcom GFP-555 Upgrades
ALL ELECTROLETIC CAPS ARE NOW NICHION BEST,AND FILM CAPS ARE WIMA, THE POWER SUPPLY HAS GOLD TUNES,MUSE BLACK GATES AND HEXFRED DIODES,THE PHONO SECTION HAVE NICHION MUSE WIMA THE IC'S WERE REPLACED WITH LINEAR TECHNOLOGY LT1115 OP AMPS
Adcom GFP-555 another picture
MORE PICTURES
Adcom GFP-555 another picture
MORE PITURES
Phase Linear 700 mkII
THIS AMP POWERS MY WOOFERS ONLY i LOVE THIS AMP
My Design Speakers
THESE ARE BIAMPED THE TOPS ARE IN THERE OWN BOX INCORPORATED INTO THE TOWER ,THE TOPS CONSIST OF A MOREL MD32 TWEETER AND (2) 4IN FOCAL MID BASS DRIVERS THE CROSS OVER IS 1ST ORDER ALL CAPACITORS ARE TOP OF THE LINE MUSIC CAPS
My Design Speakers another picture
MORE PICTURES
Marchand XM16-2 electronic crossover
A MARCHAND XM16-2 CROSSES OVER THE MID RANGE DRIVERS AND THE (3) 8INCH WOOFER DRIVERS AT 100 CYCLES IT HAS A 48 DB SLOPE
Better Cables Silver Serpent
THESES HAVE BULLET INTERCONNECTS AND I SWEAR BY THEM
Lastly heres a shot of My Crazy Stereo Rack
THIS RACK ACTUALLY HOLDS TWO FULL STERO SYSTEMS 1 IS FOR MY MAIN LISTENING ROOM ,SINCE THIS IS A BIAMPED SYSTEM IT WAS NECESSARY YO ADD AWHOLE NEW SYTEM TO POWER THE REST OF MY HOUSE , THIS WAS DONE SIMPLY WITH A HAFLER 110 PREAMP AND A MATCHIN HAFLER XL600 POWER AMP, EVERYTHING IS INTEGRATED SO I HAVE THE SAME SOURCE PLAYING IN ALL MY ROOMS AT THE SAME TIME
Try placing a layer of felt on the entire baffle surrounding the MTM array. Cut it to fit around the driver flanges as tightly as possible. You can find double sided tape that is used for "hemming a dress" at the same fabric store that you pick up the felt at. Use the tape as an outline around the drivers and around the edge of the upper baffle. This will hold the felt in place and allow you to VERY EASILY remove it with no damage to the baffle should you not like the effect. Sean >
PS... You really need to get some type of a rack that will both support all of your components and allow them to breathe. You would be better off moving your Marchand off of the top of your B&K amp and placing it elsewhere in the mean-time.