Description

After seven years of procrastination, I finally bought new speakers!

Comments welcome.

CJ
Read more...

Components Toggle details

    • Meridian 861 v6
    Analog version
    • Meridian Hd 621
    hdmi processor and switch
    • Salk SoundScape 8
    Soon to arrive. Design: 3-waywith dual 8" woofers, Accuton midrangeand RAAL ribbon tweeter Drivers (1) RAAL ribbon tweeter,(1) Accuton midrange, (2) custom 8" long-throw woofers,(2) 12" passive radiators Response 25Hz- 20KHz(+/- 1.5db) 25Hz- 60KHz(+/- 3db) Sensitivity (dB/2.83v/1M) 87db Impedance 4 ohmsnominal Recommended Amplification 40+ tube watts 100 - 250 solid state watts BoxAlignment Open-backed midrange, dual passiveradiator woofer section
    • Ayre Acoustics V-6
    Using is three channel mode, bi-amping with the two mains and single with center channel
    • Salk SS7 Center Channel
    Center channel that compliments the SS8's.
    • Furutech alpha
    All custom XLR cables and speaker cables, using their alpha product.
    • Meridian MC600
    Sooloos music distributing server. Essentially a digital transport that feeds my 861 with musical goodness.

Comments 9

Owner
System edited: There will be alot of change over the coming months. Will be trying some bi-amping, so will drop the Analysis Plus for a couple runs of Furutech bi-amping speaker cable. I am also looking for a non spinning disk streaming audio solution, so the Naim NS01 is also on the block.

yetis

Owner
I cannot believe it's been 6 years!!!!!! Wow and and still the same speakers!

yetis

Owner
System edited: Had a kid, down to one system

yetis

stay with the redbok player. Chances are very high that most of your listening will be redbook, so that's where you should focs your energies. I concur ith the Naim CDX2, especially since you can always add-on the XPS.

As for a ML 39/390S, I had one for several years, and while it's a marveous player, it's really much better with a good preamp in te mix. I was unimpressed with the Esoteric universal player.

I would add Ayre CX-7 to your slected upgrade choices.....

artg

Get a used Arcam CD 92.

coffeey

Dont know if you did find one,all i can say is Arcam cd92.Al

coffeey

If you like the Classe Omega, take a look at the new Classe Delta series CDP, or if you want SACD, the DVP. They are not yet on their website, but they are available.

hammerli

Sony SCD-777es is a good deal if you can find one -- they go for 1500-1800 on Audiogon, but disappear within minutes (literally). I got mine for only 1450 because it has a tiny ding on the faceplate, which doesn't matter to me at all. I checked it out in my system -- good timing, detail, and imaging, but somewhat mechanical and flat sounding. I've sent it to Richard Kern for mods -- the main modification is the clock upgrade, which I've already heard in my SCD-775 with fantastic results in terms of low-level resolution, timbre, and natural sound. The clock upgrade is only $300 or so (plus shipping to Oregon and back). I'm also getting the transport and audio board electronics upgrades. If you like, I'll give you a report. This may be your least expensive option for a very good CDP plus the bonus of SACD capability. The jump from CD to SACD is not subtle -- my wife and kids needed no prompting to notice and appreciate it.

rzangpo2

Owner
I had a thought. What if I got a ML 39. As it has the processor built in, I could leave the 5-DIN to RCA connections to AV2 for the Arcam DVD player and utilize the XLR connections from the ML to XLR connections on the Pass Amp. This way, I bypass the Naim unit entirely and use the theoretically (prodding here) better ML for two channel. I know Wadia can also do this, what other CD players have this processor functionality and have XLR connections?

Thoughts?

yetis

Showing all 9 posts