JBL Synthesis SDP-55

Used only briefly in a mastering facility to check that atmos music releases on Apple Music match the masters we delivered.

JBL Synthesis SDP-55
Immersive Surround Sound Processor

Immersive High Resolution Sound

16 channels of discrete high resolution processing with 4 user configurable channels enable

a plethora of set up options for Dolby Atmos, DTS:X and Auro 3D immersive surround sound

applications.

Dante Network Audio

Bridge the gap between residential and commercial applications. All 16 channels of processed

audio, plus Zone 2 can be routed on a single CAT5e or CAT6 cable over a standard network.

Dante is easy to set up and compatible with Dante enabled JBL Synthesis amplifiers.

IMAX Enhanced

IMAX Enhanced certified AV receiver, featuring DTS:X immersive audio decoding that is

optimized to properly reproduce the full dynamic range of IMAX theatrical sound mixes

available in IMAX Enhanced content.

Network and Bluetooth Streaming

Control your favorite content over Ethernet or Wi-Fi, Chromecast built-in, Apple AirPlay 2,

Roon, the Harman Luxury MusicLife app, play directly from a USB flash drive, or stream via

Bluetooth with aptX HD.

Balanced XLR Outputs

A transformerless balanced output of 2V RMS (max. 10V RMS) ensures ample gain and

common mode noise rejection.

Cinematic Video Experience

Dolby Vision, HDR10+, HDR10, HLG, HDMI, HDMI2.0b with HDCP2.2, 4K “Ultra HD” as well

as 3D video capabilities are built in.

Designed for the Integrator

With an available rack mount kit, Dante, eARC and an internal configuration page, Dirac Live,

IP, IR RS232 and iOS and Android App control the install, set up, and calibration has never

been easier.

Logic 16

Logic 16 will up-mix any input source from mono up to 15.1, including all Dolby formats with

natural astonishing 3D sound. In addition, Dolby, DTS Neural:X, and Auro 3D upmixers are

on board.

Specifications:

Stereo line inputs
-Maximum input: 4.5Vrms

-Nominal sensitivity: 1V, 2V, 4V (user adjustable)

-Input impedance: 47kΩ

-Signal/noise ratio (A-wtd ref 100W) normal/ stereo direct: 100dB/110dB

-Frequency response: 20Hz–20kHz ± 0.1dB

Preamplifier outputs

-Nominal output level (single-ended/balanced): 1V RMS/2V RMS (max. 5V RMS/10V RMS)

-Output impedance: 560Ω THD+N (20Hz–20kHz): -100dB

-Headphone output

-Maximum output level into 32Ω: 5Vrms

-Output impedance: 560Ω:<100Ω General

-Mains voltage: 110–120V or 220–240V, 50–60Hz

-Power consumption (maximum): 50W (Thermal dissipation approx. 170 BTU/hour)

-Power consumption (idle, typical): 40W (Thermal dissipation approx. 170 BTU/hour)

-Power consumption (standby): <0.5W

-Dimensions: W x D (including speaker terminals) x H (including feet): 17 x 16.7 x 6.7" (433 x 425 x 171mm)

-Weight (net): 23.4lbs

-Weight (packed): 30.6lbs