LINN AXIS - FANTASTIC UPGRADES!

LINN AXIS Turntable with fantastic upgrades.  As you can see, an excellent condition one owner AXIS Turntable with a fresh ADIKT MM cartridge ($870) upgrade and a LINN AKITO Tonearm upgrade ($2,900).  The stock AXIS comes with a BASIK tonearm, so the AKITO takes this turntable to several new levels!

Works flawlessly and sounds spectacular. The AXIS is known as a no-fuss LP12 and will bring many years of vinyl listening pleasure. This upgraded AXIS comes with original packaging and the rare to have factory shipping box!

AXIS TURNTABLE

The Axis is a precision built, twin speed (33.3 rpm and 45 rpm) transcription turntable. It is
mounted in a black veneered medite plinth, with a dark grey top-board and equipped with a
moulded, hinged dustcover.

Platter
surfaces. 12” diameter (305mm) aluminium diecast and accurately machined on all matching and visible
Weight approximately 1.5kg. The platter is supplied with a felt mat.

Bearing
Single point system running in an oil bath. The thrust pad which must support the weight of
the platter on a single point is top grade steel, machined, hardened, ground and lapped to a
mirror finish.

Motor
24-pole precision synchronous low noise, high torque motor. Fully shielded and mechanically
isolated from the main bearing assembly by resilient mounting and a damped, uniquely
designed suspension system.

Speeds
33.3 rpm and 45 rpm. Speed accuracy =0.1%
Motor Power Supply
Linn-designed 2-speed electronic ‘Class A’ power supply incorporating a stall detect circuit.
This monitors the load on the motor from start-up and reduced the power supply to the motor
once the correct speed has been achieved. It will also increase the power to the motor as
required. When this happens the relevant LED on the switch will brighten to show increased
power, and dim once power is reduced. Easily changed (internally) from 110V to 240V and
will run on 50Hz or 60Hz without modification.

Suspension
Three silicone, custom moulded rubber mounts, providing isolation for both the turntable/arm
from the motor/plinth, and the feet from the plinth. Easily adjusted to keep record platform
level.

Drive
0.01mm.
Flat, precision ground neoprene rubber belt driven by a concentric drive pulley; concentricity

Top-plate
Heavy medite wood, laminated on both sides.

Power Consumption
8 Watts

Dimensions
W 445mm x D 349mm x H 140mm
With lid open 400mm high

Weight
Shipping weight 8 kg