ORDERED FOR SHOW DEMONSTRATION, Have new and used units available!

OUTSTANDING, BEAST OF A POWERFUL AMPLIFIER WITH THE FINESSE OF THE BEST CLASS A / AB AMPLIFIERS - CAN DRIVE ANY SPEAKER, NO MATTER HOW DIFFICULT TO DRIVE IT IS - STABLE TO 0.3 OHM IMPEDANCE!

This model is among the handful of extremely rare amplifiers in the Highend Audio world that can truly drive a low impedance load of less than 0.5 Ohms with total stability and authority. 

A GREAT MATCH FOR FULLRANGE ELECTROSTATICS!

BUY WITH CONFIDENCE FROM A LONG TERM AUDIOGONER  / US AUDIOMARTER / DISTRIBUTOR / DEALER WITH 25+ YEARS OF PERFECT FEEDBACK!

CURRENT SHOW DEMOS DEMAND ALL CLASS A, #16 & HENCE THE SALE!



General 5 — CODA
https://coda.cc/coda-no-8-amplifier

Rave review links below,

Coda Technologies Coda No. 8 Amplifier and 07x Preamplifier Review by Richard Willie (stereotimes.com)

Coda No. 8 Amp is Compared to Pass Labs XA-60.8 – Destination HiFi

CODA IS MY REFERENCE AMP FOR ALL THE SHOW DEMONSTRATIONS THUS FAR WITH FINAL ELECTROSTATIC SPEAKERS!

COMPARED DIRECTLY WITH PASS LABS 150.8 or 250.8, THIS BEAST EQUALS OR OUTPERFORMS IN EVERY SIGNIFICANT ATTRIBUTE, WITH BETTER HIGH FREQUENCY EXTENSION!

BEAUTIFUL, ELEGANT BLACK FINISH, CAN BE SWAPPED FOR SILVER IF CHOSEN!

<1 OHM STABLE, 3 Kw TRANSFORMER WITH 20 HIGH OUTPUT TRANSISTORS PER CHANNEL!

THIS IS THE V1 VERSION WITH FIRST 18 WATTS @CLASS A,

The bias can be reset at the factory for V2 @250W or V3@ 400W into 8 ohms.


Highly regarded, only selling to accomodate change in show demo requirements!

FULL 10 YEAR WARRANTY for NEW, 4.5 YRS FOR USED UNIT!

BUY WITH CONFIDENCE FROM A DEALER / DISTRIBUTOR WITH PERFECT FEEDBACK!

 The Coda Continuum No. 8 amplifier is designed with the same level of thoroughness usually
 reserved for the finest amplifier gain stages. Balanced interconnections are provided to take
 advantage of the greater noise rejection they provide. Differential voltage gain throughout
 provides exceptional rejection of external noise and contributes to the inherent DC stability of
 the circuit. This allows direct coupling at the Balanced Inputs without servo circuitry. The unit
 also uses output followers operating without feedback.
 The front end is designed to provide a slew rate of 50 V/us without entering Class B operation
 as is common in many other designs. This combined with excellent high frequency design
 insures linear operation at high speed. The supplies take a very direct approach to high
 performance. A top quality 3000VA toroidal transformer with independent
 rectifiers
 80,000 uF of total capacitance with very low ESR and inductance are used.
 and about
 The current stage is capable of producing currents in excess of 100 peak Amperes with a
 degree of linearity and speed which is not matched by other designs when producing only a
 fraction of this current. This is achieved by the implementation of several distinct circuit
 features.
 Each channel uses 20 individual output transistors with a combined power capability of 3600
 Watts and 75 Amps with a bandwidth of 10 Mhz.
 The bias section is designed to produce a precision transition with no abrupt changes in
 distortion or output impedance. This “Precision Bias” technique yields seamless performance
 regardless of the complexity of the load impedance. With such linearity and bandwidth, no
 overall feedback correction is used. One advantage of this is a high degree of immunity from
 interactions with complex speaker loads or cables

----------------------------------------------

Coda Continuum No. 8 Amplifier

Specs
RATED POWER  

V3: 400 Watts x 2 into 8 Ohms

800 Watts x 2 into 4 Ohms

Class A ~8 Watts  

V2: 250 Watts x 2 into 8 Ohms

500 Watts x 2 into 4 Ohms

 Class A ~12 Watts  

V1: 150 Watts x 2 into 8 Ohms

300 Watts x 2 into 4 Ohms

Class A ~18 Watts  

BANDWIDTH  

DC or -3dB at 5 Hz through 100kHz depending on input  

DISTORTION  

Less than .03% from 10Hz to 20kHz at 350 Watts both channels driven into 4 through 8 Ohms  

GAIN  

26dB  

CURRENT CAPABILITY  

150 Amperes peak  

SLEW RATE  

50 Volts/microsecond  

INPUT IMPEDANCE  

50k Ohms unbalanced/10k Ohms balanced  

OUTPUT IMPEDANCE  

.04 Ohms from 20Hz to 20kHz  

NOISE  

More than -116dB referenced to rated output  

POWER SUPPLY  

3.0kVA toroidal transformer with independent rectifiers and 80,000 uF of capacitance  

DIMENSIONS  

Faceplate: 17 inches wide by 5.5 inches tall 

Chassis: 16.75 inches wide by 6 inches tall by 14 inches deep  

WEIGHT  

62 lbs  

20 individual output transistors per channel, with a combined power capability of 3,600 watts and 75 amps with a bandwidth of 10 MHz

Damping factor of 200

Distortion rating- .0089 % THD

1 Pair XLR Inputs

1 Pair RCA Inputs



MANUAL LINK HERE,Download Manual (coda.cc)