2 each Nagra classic Amplifier Stereo with VFS Mono setup.
Listed · 306 Views
Time Left: 17 Days
Ending: 10/04 at 12:43 PM ET
New Retail Price:$46,001.00
$25,000.00
| Condition | |
| Payment methods |       |
Contact seller after sale to pay viaPersonal check, COD or Wire Transfer | |
| Ships from | Covina, CA, 91724 |
| Ships to | United States |
| Package dimensions | 24.0" × 20.0" × 15.0" (50.0 lbs.) 24.0" × 20.0" × 15.0" (50.0 lbs.) |
| Shipping carrier | unspecified |
| Shipping cost | Specified after purchase |
 Average | Research Pricing |
Sunny Components Inc,
Tuesday, Wednesday, Thursday, and Friday: 10:00 am—6:00 pm; Saturday: 10:00 am-4 pm; closed on Sunday and Monday.
1370 E Cypress St Ste D, E Covina CA-91724 USA
Tel: 626-966-6259. Fax: 626-966-5467. Cell: 626-975-1353.
Email: [email protected].
Store Website: www.sunnyaudiovideo.com Visit our website for more offers on CH Precision and other brands.
Just reduced for a quick sale
Some of the finest products are built in America & Europe, combined with the
finest service, know-how, and expert setup from Electrical power to
the finest Audio stands, electronics speakers, turntables, and streaming.
We stock, install, and configure Roon and MQA.
Our store website for new and pre-owned products Store Website: www.sunnyaudiovideo.com
An extra 4% fee will be charged for Audiogon charges.
An extra 4% fee will be charged for credit card processing.
Local pick-up is available.
This sale is for 2 each Nagra Classic series amplifiers. Making these a Monoblock pair.
Features of this item
Generally, the assembly of an equivalent output stage requires several pairs of transistors, which is difficult to achieve precisely. The simplicity of the CLASSIC AMP's design is the key to its musicality.
The input and driver stages also contribute equally to the overall performance and precision.
The Nagra CLASSIC AMP is characterized by its stability, irrespective of its loads.
The power circuits drew particular care in the design stage.
They are based upon an innovative concept: An over-dimensioned transformer and a diode bridge are placed upstream of the PFC decoupling stage and used to correct the power factor actively.
The filtering is achieved with a bank of capacitors totaling 300,000 μF.
This supply concept ensures efficient energy transfer and allows immediate reaction on even the most abrupt transients.
The Nagra CLASSIC AMP's front panel features a traditional Nagra Modulometer, which shows the power of each output channel.
An LED is also fitted to indicate saturation and excessive temperature.
The amplifier has balanced and unbalanced inputs and an IN/OUT trigger function. It can be used in a bridged configuration, giving 1x 200 W into 4 Ω, and can also be used in a bi-amplification configuration if desired.
Technical specification
ELECTRONICS
| Power: | 100 W RMS per channel into 8 Ω |
| Sensitivity: | 1 V or 2 V RMS |
| Bandwidth: | 10 Hz to 80 KHz, +0/-3 dB |
| Crosstalk: | >70 dB |
| Signal-to-noise ratio: | Typically 110 dB ASA "A" weighted |
| THD+N: | < 0.05% |
| Input impedance: | >100 KΩ |
| Automatic start: | For input level >10 mV |
| Protection: | Overheating > +60° C (140° F) |
| Deactivates the amplifier: | DC speaker protection above ± 2.5 VDC |
GENERAL
| Consumption: | 400 W max less than 1 W in standby and Auto mode |
| Weight: | 18 Kg (39 lb 10 oz) |
| Size: | 350 (400 from the nose of the modulometer to the back of the connectors) x 277 x 165mm (15.7 x 10.9 x 6.5 inches) – Add 3cm or 1.2 inches with a VFS plate placed under |
| Operating range: | 90 – 110 V or 110 -132 V or 180 – 264 V a.c. 50 – 60 Hz |
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.
