Vinnie RossiBrama Pre-amplifierusedVinnie Rossi Brama Pre-amplifier Gen-1 Store DemoSunny Components Inc, 1370 E Cypress Street, Suite D. Covina, Ca-91724. We are Located in Los Angeles, 20 minutes north of Orange County and 20 minutes Northeast of Pasadena. We have a beautiful 20...26399.00

Vinnie Rossi Brama Pre-amplifier Gen-1 Store Demo

Listing ID: lisbb39c Classified 
 Listed  · 81 Views

Time Left: 30 Days

Ending: 12/05 at 10:06 AM ET

New Retail Price:$38,000.00

$26,399.00

Buy It Now
Make Offer
Condition
10/10
Payment methods

Contact seller after sale to pay via Personal check, COD or Wire Transfer

Ships fromCovina, CA, 91724
Ships toUnited States
Package dimensions26.0" x 30.0" x 18.0" (65.0 lbs)
Shipping carrierunspecified
Shipping cost
Log in to see price
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

Sunny Components Inc,
1370 E Cypress Street, Suite D. Covina, Ca-91724.
We are Located in Los Angeles, 20 minutes north of Orange County and 20 minutes Northeast of Pasadena.
We have a beautiful 2000sqft showroom.  
( We also have the matching Amplifier for sale )

All combination sales are final. 
Call us for immediate information on all our products at 626-966-6259.

We are offering a MINT condition Preamplifier for sale. 
( We also have the matching amplifier and integrated amplifier for sale )
This unit is our store Demonstration unit. 
This unit will be packaged in original boxes and supplied with a remote.
The factory will warrant this unit. 

The heart and soul of your system.

Brama Preamplifier’s line stage is Vinnie Rossi’s realization of the audiophile dream – having it both ways, each at the highest possible level of performance:

Whether you are seeking the tonally rich and holographic presentation of 300B directly-heated triodes or the absolute purity of solid-state, the Brama Preamplifier is the only one in the world that lets you enjoy both sonic presentations with the press of a button.

Fully balanced, dual mono input-to-output architecture is positioned directly behind the rear panel for the shortest possible signal paths. Super-regulated power supplies for both the power rails and 300B heating supply achieve ultra-low noise and optimal transient response.

 

Pure analog emotion.

The front panel of the Brama Preamplifier reveals a clean layout, luxurious feel, and timeless design that intentionally excludes digital displays and push buttons.

Each bespoke analog gauge features precision air core movements, responsive driver circuitry, and machined aluminum hands. Sapphire glass and highly polished stainless bezels integrate the gauges with the front panel.

Solid aluminum knobs on the front panel are attached to Swiss-made, precision-stepped rotary switches that give manual control an incredibly satisfying feel. 

As with all Brama gauges, backlight intensity is adjustable via the Brama Remote and is visually stunning, day or night!

 

You already know how to use it.

Brama Remote’s intuitive menu structure, high-resolution display, and tactile push buttons allow you to control your listening experience seamlessly.

A built-in ambient light sensor and accelerometer automatically control the display brightness and senses when you are ready to take control. Bluetooth communication with your Brama Preamplifier means there are no line-of-sight or range issues, and USB-C connectivity makes battery recharging and firmware updates easy.

Brama Remote is machined from a solid block of aluminum and uses sapphire glass for the display area, offering remarkable scratch resistance and clarity.

 

Power with perception.

Combining responsiveness with resiliency, Brama Preamplifier’s massive power supply boasts a custom-wound 1750VA, magnetically shielded transformer with a highly inductive, insulated core.

Dual secondary windings feed independent, dual-mono linear power supply PCBs. Ultrafast soft recovery diodes, massive filter capacitors, and super-regulated outputs deliver low noise and superb transient response.

The AC mains power is continuously monitored for fault conditions, delivering protection and notification to the Brama Remote in microseconds. There is no need to replace interior fuses, as our Hall-effect current sensors deliver advanced protection faster than you can blink!





Opening a new chapter…

Brama Preamplifier incorporates advanced electrical, mechanical, and industrial design techniques throughout. Starting with a low-resonance plinth, the entire chassis is machined from solid aluminum billet that is finely bead-blasted, anodized, and laser engraved for a spectacular finish that feels as premium as it looks.

Inside the Brama is equally impressive. Multilayer, gold immersion PCBs with high copper content meticulously route analog, power, and fault-protection circuitry.

Every Brama is hand assembled and tested, one at a time, in our new manufacturing facility in Massachusetts, USA, and is backed by a 10-year warranty.

 

Additional Features

Controls

• Volume control: 100-step, resistor ladder topology

• Input select: 1 through 5

• Gain: -12dB, -6dB, 0dB, +6dB, +12dB

• Triode mode: 0%, 25%, 50%, 75%, 100%

• Balance: 12-steps L/R from center

• Phase: Normal/Inverted outputs

• Stereo/Mono mode

• Memory Inputs: Yes (each input saves the setting for Triode,

Gain, Balance, Phase, and Stereo/Mono)

• Home Theater Bypass mode: Yes

_________________________________

Front Panel

• Left gauge: Input, Balance, Triode (%), and Gain (dB), with

indicator LEDs to show the parameter being adjusted

• Right gauge: Volume mode (0-100) and VU mode, with indicator

LEDs to show the mode selected

• Gauge backlight: Off, Low, Medium, High

• Gauge Glass: Sapphire crystal

• Left knob: 24-position, Swiss rotary encoder with magnetic

sensing and built-in push-button switch for powering On/Off (3-second

push-and-hold)

• Right knob: 48-position, Swiss rotary encoder with magnetic

sensing and built-in push-button switch for MUTE (quick press) and

Volume/VU mode select (3-second push-and-hold)

_________________________________

Rear Panel

• Line-level inputs: 5 sets of XLR inputs

(1 set of RCA-to-XLR adapters are included)

• Line-level outputs: 3 sets of XLR outputs (volume controlled)

• Trigger outputs: 2

• AC input jack: IEC 320-C14 with built-in fuse holder

_________________________________

Remote

• 2.4” high-resolution LCD with sapphire glass

• Connectivity to Brama: Bluetooth

• Adjustable backlight (Manual mode / Auto-mode via ambient

light sensor)

• 3.7V Li-ion rechargeable battery (user replaceable)

• USB-C jack (for battery charging and firmware updates)

• Built-in accelerometer (for automatic wake-up from sleep mode)

• Machined from a solid block of aluminum

_________________________________

Power Supply

• Transformer: Custom-designed, 1750VA toroid with dual-mono

secondary windings. Encapsulated in epoxy resin and shielded.

• Belleson SPX-VR super-regulated power supplies for L/R

line stage section and 300B cathode heating.

• Separate, isolated power module for control and gauge circuitry.

_________________________________

Protections

• AC mains voltage (under and overvoltage protection)

• 300B under and overcurrent protection

• Preamplifier outputs (overcurrent protection)

• Automatic reporting to Brama Remote (diagnostics)

 

Specifications

_________________________________

Operating Voltage Range: 100-125Vac or 210-250Vac, 50/60Hz

(transformer primaries are automatically switched based on the

AC mains voltage detected)

_________________________________

THD+N (solid-state linestage): < 0.01% (20Hz – 20kHz)

THD+N (300B Triode linestage): < 1% (20Hz – 20kHz)

_________________________________

Frequency Response: 5Hz – 100kHz (+/- 0.5 dB)

_________________________________

Signal-to-Noise Ratio (0% Triode mode): > 110dB (20Hz – 20kHz)

Signal-to-Noise Ratio (100% Triode mode): > 100dB (20Hz – 20kHz)

 _________________________________

Input Impedance: 100k ohm

_________________________________

Gain: Adjustable (-12dB, -6dB, 0dB, +6dB, or +12dB)

_________________________________

Output Voltage: 20Vrms, max. (balanced outputs)

_________________________________

Output Impedance: < 100 ohms

_________________________________

IEC Jack Fuse: 10A, Slow Blow (5x20mm)

_________________________________

Product Weight: 80 lbs (36 kg)

Product Dimensions (including knobs, jacks, and feet):

20.5″ width x 16.25″ depth x 5.75″ height (520mm x 410mm x 145mm)

Remote Dimensions: 6″ x 2″ x 0.5″ (150mm x 50mm x 12.5mm)

Shipping Weight: 105 lbs (48 kg)

Shipping Carton Dimensions: 24″ x 24″ x 14″ (610mm x 610mm x 355mm)

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.

smer319 

member since November 2009

Sunny Components Inc  Verified Dealer

Last 12 months
All-time984100.0%

1 Watcher