Bryston BDA-3

Bryston BDA-3 DAC in very good condition, silver finish. Unit sold as new for $3,500.00. Original box included, but some of the packing has been lost. 

Description: Digital-to-analog processor with remote control of up-sampling and some digital inputs. Digital inputs: 2 asynchronous USB 2.0 Type B; 4 HDMI (all HDMI 1.4a compliant; input 4 also HDCP 2.2 compliant), 2 S/PDIF electrical (1 BNC/coaxial wire, 1 RCA); 1 optical (TosLink); 1 AES/EBU (XLR). Digital input sample rates accepted: 32, 44.1, 48, 88.2, 96, 176.2, 192, 352, 384kHz PCM (S/PDIF, AES/EBU); DSD64 (HDMI, USB), DSD128 to DSD256 (USB only). USB audio drivers for computer sources: Microsoft Windows USB Audio Driver v3.23.0 required; no driver required for Macintosh or Linux. Control inputs: IR, 3 two-way interfaces (Ethernet, USB, RS-232), power/standby trigger input (3.5mm) carrying 3–12V AC or DC. Analog outputs: 1 pair each balanced (XLR), unbalanced (RCA). Digital outputs: 2 USB 2.0 Type B, 1 HDMI. Maximum outputs: 4.0V balanced, 2.0V RMS unbalanced. Input impedance: AES/EBU (110 ohms); S/PDIF 1 (75 ohms coaxial RCA), S/PDIF 2 (75 ohms coaxial BNC). Output impedance: not specified. Upsampling: 44.1 and 88.2 to 176.4kHz; 48 and 96 to 192kHz. DAC filter settings: Super Slow Rolloff, Short Delay Slow Rolloff, Slow Rolloff, Short Delay Sharp Rolloff, Sharp Rolloff. Frequency response: 20Hz–20kHz, ±0.1dB. THD+noise at 1kHz: 0.002%. IMD (CCIF): 0.0003%, 19+20kHz. Channel separation: not specified. Output noise: –140dB balanced, 20Hz– 20kHz, ref. 1V. Signal/noise: 140dB. Dynamic range at –60dBfs: not specified. Jitter: not specified. Power consumption: 10VA.
Dimensions: 17" (431.8mm) or 19" (482.6mm) W (depending on faceplate chosen) by 3.63" (92.2mm) or 2.76" (70mm) H (with/without feet) by 11.12" (282.45mm) D. Weight: 8.5 lbs. (3.9kg).