Durand Tonearms TALEA Full Set

Offered is the Durand Tonearms Talea. A world class hand crafted work of audio art. This arm has seen light use in a large collection and is very close to mint with only very light signs of use. Full set including amazing hand made wooden case included. A stunning arm in performance, operation and looks! Please message with any questions you may have.

• Effective length: 263 mm (10.35”)

• Pivot-spindle distance: 247.37 mm (Loefgren A geometry). Because the pivot is offset from the VTA tower, the Talea™ can be mounted in about the position of a 9” tonearm

• Overhang: 15.66 mm. Effective length fine adjustment is realized with a cartridge plate on which the cartridge is mounted (Please see our page on cartridge alignment here)

• Offset angle: 20.81 degrees.

• Cartridge mount: 1/2”

• Mounting distance (from spindle): 207.8-220.2 mm (8.3-8.7”).

• Mounting on the plinth/armboard is done with 2 x 10-24 (or M4) screws (for metal armboards) or 4 x #8 wood screws (for wood armboards). No large central hole needs to be bored

• Weight of the whole assembly: ca. 2.3 lbs (1.04 kg)

• Bearing: Unipivot, Swiss-made non-corrosive, non-magnetic stainless steel pivot in a sapphire jewel. The center of mass of the tonearm is in the same plane as the bearing, thus ensuring an ideal dynamic balance, without the need for the outrigger weights commonly found on other unipivot systems

• VTA: on the fly fine adjustment, with knob; each turn of the knob corresponds to 0.5 mm change in height, thanks to an extremely precise 50 TPI thread (finer than micrometer thread). Maximum range: 23 mm. The VTA tower is fastened to the inner column with a clamp mechanism, ensuring maximum mating and rigidity between the parts

• Azimuth: adjustable on the fly. We discuss the question of azimuth setting here

• Progressive anti-skating mechanism; can be disabled if desired

• Counterweights: 130 g, 95 g, 60 g; with additional fine adjust weight to allow adjustment of VTF in small increments (typically +/- 0.1 g). The Talea™ is a medium mass tonearm, and the combination of counterweights provided with it allows use of most cartridges currently available. The Talea™ has been successfully tested with cartridges from 5 to 15 grams, with compliance from 8 to 20 µm/Mn

• Phono cable uninterrupted from cartridge clips to termination connectors, except at the junction internal wires-interconnect cable

• Jig to set the pivot-to-spindle distance provided; no need for a ruler, the jig places the tonearm exactly in the right position

• Arc protractor included

.
Please follow us in our e-store using the follow dealer button. You'll be notified when we list new items... And there are a TON coming!!

Welcome to another Audio-Ranch.com listing! While the name may be new, here at the Audio-Ranch we have over 40 years experience in high end audio! Formerly MAZE Analog, I have had the pleasure of repairing your tonearms here on Audiogon since 2019 and being a member since 2004. Early this year we acquired one of the most amazing high end collections I have ever seen. Since then we have been pouring over every piece of gear... listening, testing and preparing to send it to you, our discerning clients. Please have a look at our listings as they come online, and if you'd like to see the full list of over 3.5 million dollars in equipment please reach out and I'll be happy to forward you a copy. Happy listening, and we here at Audio-Ranch.com look forward to serving you!

Tim Corn
Audio-Ranch.com

Listings under $5000 can use the Audiogon checkout system via Stripe payments. Listings over $5000 require bank transfer, no exceptions. Please see our feedback, we have been a long standing Audiogon seller for nearly 20 years. Your complete satisfaction is our #1 goal.
All Audio-Ranch.com items sold on Audiogon include free shipping to the continental US. Please contact us for an international shipping quote.