Kuzma4POINTnewKuzma 4POINT 9 tonearmBrand new, award winning, Kuzma 4Point model 9, nine inch effective length tonearms available, please contact us directly for more information. These are the latest version featuring Ruby Sapphir...

Kuzma 4POINT 9 tonearm

Listing ID: lisa9f5a Classified 
 Listed  · 41 Views

Time Left: 26 Days

Ending: 12/15 at 04:35 PM ET

Contact for Price
Contact for Price
Condition
NEW
Payment methods
Ships fromHammond, IN, 46324
Ships toUnited States
Package dimensions13.0" x 10.0" x 8.0" (6.0 lbs)
Shipping carriersUSPS, UPS or FedEx
Shipping cost$68.00
Original accessoriesBox, Manual
AverageResearch Pricing

Brand new, award winning, Kuzma 4Point model 9, nine inch effective length tonearms available, please contact us directly for more information.   These are the latest version featuring Ruby Sapphire yoke bearings.  Please contact me directly for more details. 

Proudly serving the greater Chicagoland area.   
Artisan Fidelity
www.artisanfidelity.com

[email protected]
219.933.8115

4Point 9  is shorter version of 4Point tonearm. Due its 9 inch length and lack of VTA tower makes this tonearm lighter and smaller thus capable of fitting on most suspended turntables.

All 4P9 has sapphire/ruby cup bearings  fitted  since its introduction and  all 4P11 and 4P14 since July 1st 2018.

Specifications:

Effective length229 mm Arm mount distance 212 mm Spindle to pivot distance 212 mm Bearing type 4 points (sapphire-transparent / ruby-red cups / steel pivots-see modification note for 4P11 or 4P14) Effective mass 13 g Total mass 920 g Offset angle 23 deg VTA adjustment Yes Azimuth Worm drive Tube Conical Bias Yes Max cartridge mass 35 g Damping No Detachable headshell Yes Arm mount Kuzma Standard wiring Silver Accessories Yes Optional wiring Yes - Many different selections available.
Optional connectorsXLR,5 Pin

Differs from other  tonearms by introducing several new and unique features.  The new zero-play bearing is configured on 4 points. The heart of this new design is the unique 4-point bearing. Two points (which are similar to a uni-pivot bearing) allow and control vertical movements of the tonearm. The other set of two pointed bearings allow and control horizontal (lateral) movements of the tonearm.  All four points of the bearing have minimal friction and zero-play in all planes of movement, thus ensuring that the cartridge platform and the cartridge itself follow the grooves of an LP with extremely low friction and minimal vibrations.
4POINT’s main section is firmly connected to a very rigid and inert VTA tower which provides the option of fine adjustments of the vertical tracking angle either when the tonearm is stationary or while the LP is playing.  All this, of course, without any loss of rigidity and with 0.01mm accuracy of adjustment and zero-play!
The main tube is accurately machined out of a solid rod of aluminium as in our Air Line parallel tracking tonearm.  Two separate troughs offer independent damping of vertical and horizontal resonances allowing a very high degree of fine adjustment and tuning at all times. If so desired, damping troughs can be easily be detached from the tonearm.
4POINT’s arm balancing solution consists of two counterweights – the main weight allows an accurate overall balance once the cartridge has been installed, while the second, smaller weight provides extremely fine further adjustment for total tracking force accuracy.
Introduced: 2008
Azimuth is adjustable by precise worm drive mechanism allowing very small, repeatable adjustments.
Detachable headshell is another distinctive feature of this superior tonearm. Using a small Allen key, one can completely remove the headshell from the arm tube while the arm wiring including cartridge pins remains uninterrupted in its single run.  Our headshell is fixed with a hexagonal locking system which provides the same degree of rigidity as if the headhsell was permanently bonded to the arm tube.
4POINT’s internal wiring is of the highest quality using special alloy silver formulation.  A single, uninterrupted set of 4 wires runs from the cartridge pins to the   RCA connectors (overall length 1.4m).
Other wiring options are possible including Biwring: two sets of wires( 8 in total) runs simultaneously from the cartridge clips into the termination box and one set connects to the female RCA connectors, allowing use of an alternative tonearm cable between the termination box on the 4POINT and a phono input on your preamplifier. second sets runs directly from cartridge clips to male RCA connectors in one uninterupted way.
In Manual folder find drawings how to fit this tonearm on other turntables!
TAS-USA-2020
 
Stereophile July 2012:  4Point on Onedof turntable by M. Fremer:   "It produced an experience like listening to open-reel tape, with imaging and soundstaging stability superior to those of any arm I’ve heard, including Continuum Cobra.

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.

chris74 

member since January 2003

Artisan Fidelity  Verified Dealer

Last 12 months
All-time336100.0%

More Kuzma Listings

4POINT Kuzma

2 for sale

5 Watchers