Yamaha AS2200 AS 2200

Yamaha AS2200 AS 2200 Silver NEW

Yamaha A-S2200 Specifications

Color Silver Rated output power 2-channel driven 8Ohm: 90 W + 90 W
4Ohm: 150 W + 150 W (20 Hz to 20 kHz, 0.07% THD) Dynamic power 8Ohm: 105 W + 105 W
6Ohm: 135 W + 135 W
4Ohm: 190 W + 190 W
2Ohm: 220 W + 220 W IEC output power 8Ohm: 95 W + 95 W (1 kHz, 0.07% THD) Maximum effective output power 8Ohm: 120 W + 120 W
4Ohm: 190 W + 190 W Power bandwidth 2-channel driven 8Ohm: 10 Hz to 50 kHz (0.1% THD, 50 W) Damping factor 8Ohm: 250 or higher(1 kHz) Input sensitivity PHONO (MC): 150 micro Vrms / 50Ohm
PHONO (MM): 3.5 mVrms / 47 kOhm
CD (or similar): 200 mVrms / 47 kOhm
MAIN IN: 1 Vrms / 47 kOhm
BAL 1/BAL: 200 mVrms / 100 kOhm Maximum input PHONO (MC): 2.0 mVrms
PHONO (MM): 50 mVrms
CD (or similar): 2.80 Vrms
BAL: BYPASS: 2.80 Vrms
ATT.: 5.60 Vrms (-6 dB) Rated output voltage LINE 2 OUT: 200 mVrms / 1.5 kOhm
PRE OUT: 1 Vrms / 1.5 kOhm Headphone jack rated output power 50 mW + 50 mW (1 kHz, 32 Ohm, 0.2% THD) Frequency response 5 Hz to 100 kHz: +0 / -3 dB
20 Hz to 20 kHz: +0 / -0.3 dB Deviations from RIAA equalizer PHONO (MM/MC): +/-0.5 dB Total harmonic distortion plus noise 2-channel driven: PHONO (MC) - LINE 2 OUT, 1.2 Vrms: 0.02%
PHONO (MM) - LINE 2 OUT, 1.2 Vrms: 0.005%
CD (or similar)/BAL 1/BAL 2 - SPEAKERS OUT, 50 W/8Ohm: 0.035%

Signal-to-noise ratioPHONO (MC): 90 dB
PHONO (MM): 96 dB
CD (or similar): 110 dB
BAL 1/BAL 2: 114 dB Residual noise 33 micro Vrms Channel separation PHONO (MC): 66/77 dB or higher
PHONO (MM): 90/77 dB or higher
CD (or similar)/BAL: 74/54 dB or higher Tone control characteristics BASS: Boost/cut: 50 Hz / +/-9 dB
Turnover frequency: 350 Hz

TREBLE: Boost/cut: 20 kHz / +/-9 dB
Turnover frequency: 3.5 kHz Power supply AC 120 V, 60 Hz Power consumption 350 W Standby power consumption OFF mode: 0.1 W
Standby mode: 0.2 W Dimensions (W x H x D) 17.13 x 6.13 x 18.25" (43.49 x 15.57 x 46.35cm) Weight 50 lbs (22.6kg)